HighSecLabs SM20-4 Manuals

SM20-4SM40-4 SM80-4 | QUICK INSTALLATION GUIDE ©2019 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL). All other marks are the property of their respective owners. Images for demonstration purposes only. HDC22995 Rev.1.0 Objectives • This guide includes instructions for installing and basic operation of HSL’s Secure KM Switch SM20-4, SM40-4, SM80-4 devices. • For further assistance please refer to HSL website: http://www.highseclabs.com • The following diagram references the SM40-4 device but it is applicable to all devices specified in this manual. Quick Installation Guide 2/4/8 Ports High Security KM Switches Installation Precautions: Do not connect this product to computing devices that: • Are TEMPEST computers • Include telecommunication equipment WARNING: Peripherals' Warning - For security reasons, this product does not support wireless keyboards. It is recommended not to connect a microphone or headset to the audio output port. NOTE: In order to comply with the product’s Common Criteria evaluation and to prevent unauthorized administrative access to the product, the default administrator username and password must be changed prior to first product use. Installation: • Verify that all computers are turned OFF prior to connecting them to the product. • Connect the computers and peripherals to the HSL KM as shown in the above diagram. • It is possible to connect an HSL AFP (remote control) to the RDC port of these devices. Please refer to the AFP datasheet on how to connect it. • Computer Video Connection Directly connect a display to each PC. Multi-Monitor computers might require driver installation (currently available only for Windows http://highseclabs.com/dl.phpfid=446). • Power ON the PCs: Make sure that the PCs are turned ON prior to powering ON the KM. • Power ON the system: Power ON the KM by plugging it to the DC wall outlet. By default, after product power-up, the active channel will be computer #1, indicated by the applicable front panel push button LED lit. Using the HSL KVM Switch: Control of the HSL KVM Switch is done, primarily using the push buttons on the product front panel. Switch between computers by pressing the corresponding front panel button on the KM. The front panel button of the selected computer will illuminate. Important Notes: 1. Anti-Tampering System: This HSL high security product is equipped with an always- on active anti-tampering system. If mechanical intrusion is detected, the product is permanently disabled and abnormal LED behavior is activated, with all LEDs blinking continuously. 2. Power ON Self-Test Procedure: As the product powers-up, it performs a self-test procedure. In case of self- test failure for any reason, including jammed buttons, the product is inoperable and self-test failure is indicated by abnormal LED behavior. In the above-mentioned cases, please call Technical Support and avoid using the product. For further information please refer to the product administrator and setup guides. SM40-4 Model is shown Rear Panel Index: 1. HID - Console Keyboard/Mouse 2. PC Keyboard/Mouse inputs 3. Power DC in 4. Remote Desktop Control port (for AFP) Introduction Thank you for purchasing this HSL Secure KM Switch. This KM Switch is designed for use in secure defense and intelligence environments across wide security gaps.