Honda 08V67-TE0-100A Manuals

1 pdf manual(s) Honda 08V67-TE0-100A for free download (Document Types: Installation instructions manual)

Honda 08V67-TE0-100A Installation instructions manual [PDF] (15 pages)

  • Identifier: id-456996
  • Brand: Honda
  • Device: 08V67-TE0-100A Automobile Accessories
  • Type: PDF
  • Key Aspects: Product Performance Metrics, Recommended Spare Parts List, Basic Configuration Guidelines
  • UPD Date: 13.07.2026
  • Source File: 440240.pdf
  • Pages: 15
  • Description: Maintenance instructions for the Honda 08V67-TE0-100A.
Pages Preview:
  • 2 of 15 AII 37561-38377 (0711) © 2007 American Honda Motor Co., Inc. – All Rights Reserved. Flange bolt, 6 x 12 mm Flange nut 4 Harness tapes Accessory User’s Information Manual Back-up Sensor Kit P/N 08V67-TE0-100K 2 Center sensors 2 Corner sensors (Blue) (White) TOOLS AND SUPPLIES REQUIRED Phillips screwdriver Flat-tip screwdriver Ratchet 8 mm and 10 mm Socket Pushpin Drill 3 mm Drill bit 24 mm and 26 mm Hole saw Ruler Eye protection (safety goggles
  • © 2007 American Honda Motor Co., Inc. – All Rights Reserved. AII 37561-38377 (0711) 3 of 15 2. Disconnect the negative cable from the battery. 3. Remove the two covers from the rear bumper and remove the rear bumper (two bolts, six self-tapping screws, two clips, and unplug one connector). NOTE: Have an assistant help you remove the rear bumper. 4. Remove the trunk floor mat (one clips). 742003CB 6 SELF-TAPPING SCREWS REAR BUMPER 2 CLIPS 2 COVERS 2 BOLT
  • 4 of 15 AII 37561-38377 (0711) © 2007 American Honda Motor Co., Inc. – All Rights Reserved. 8. Using the trim tool, remove the rear shelf access panel, then release the front rear speaker retaining tab. 9. Remove the left rear speaker cover (nine retaining tabs). REAR SHELF ACCESS PANEL LEFT REAR SPEAKER COVER TRIM TOOL (TN SILRIMTL10) 742418AE LEFT REAR SPEAKER COVER 9 RETAINING TABS 10. Remove the left rear speaker (one bolt and disconnect the vehicle
  • © 2007 American Honda Motor Co., Inc. – All Rights Reserved. AII 37561-38377 (0711) 5 of 15 L4 Model 12. Install the control unit to the vehicle panel: • Partially thread the 6 mm flange nut onto the control unit bracket stud. Insert the control unit bracket stud into the hole in the vehicle panel. Tighten the 6 mm flange nut to secure the bracket to the vehicle panel. 742311CE VEHICLE PANEL CONTROL UNIT CONTROL UNIT BRACKET STUD BOLT HOL
  • 6 of 15 AII 37561-38377 (0711) © 2007 American Honda Motor Co., Inc. – All Rights Reserved. 13. Attach the 2A fuse label to the fuse case on the back-up sensor harness. 742312AE 2A FUSE LABEL FUSE CASE BACK-UP SENSOR HARNESS 14. Disconnect the back-up light 2-pin connector from the left taillight, and plug it into the back-up sensor harness 2-pin connector. Plug the remaining back-up sensor harness 2-pin connector into the left taillight. 742313BE BACK-
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Publications No. Issue Date INSTALLATION INSTRUCTIONS Accessory Application © 2007 American Honda Motor Co., Inc. – All Rights Reserved. AII 37561-38377 (0711) 1 of 15 08V67-TE0-1000-91 AII 37561-38377 BACK-UP SENSOR 2008 ACCORD 2-DOOR NOV 2007 PARTS LIST Back-up Sensor Attachment Kit P/N 08V67-TE0-100A Control unit Beeper 4 Sensor clips Back-up sensor harness Back-up sensor subharness Control unit bracket (L4) Control unit bracket (V6) 13 Wire ties Wire tie with clip 2 Wire ties with holder 2 Urethane tapes Fuse label www.collegehillshonda.com

Honda 08V67-TE0-100A: Automobile Accessories Category Related Instructions

MO9135
MOB MO9135
04.09.2026 12 pages

USER MANUAL Hereby, MOB, declares that item MO9135 is in Compliance with the essential requirements and other relevant conditions of Directive 2014/30/EC. A copy of the DOC (Declaration of Conformity) is available at: [email protected] or MOB, PO BOX 644, 6710 Technical operation manual for the MOB MO9135 Automobile Accessories. This manual describes setup, usage, and startup procedures, troubleshooting, network configuration.

Ventvisor
AVS Ventvisor
17.05.2026 9 pages

Installation Instructions Ventvisor® Deflector Contents - 2 Piece Set Page 1 of 3 Contents - 4 Piece Set Alcohol Pad x2 Front Driver Side Visor Front Passenger Side Visor Front Driver Side Visor Front Passenger Side Visor Rear Driver Side Visor Rear Passenge Device user manual for the AVS Ventvisor Automobile Accessories. This manual provides information on safety information, supported accessories, maintenance guidelines, software updates.

MCC-500
Black Widow MCC-500
29.04.2026 6 pages

Page 1 Rev. 032318 DiscountRamps.com • 1-888-651-3431 Steel Motorcycle Carrier Instructions for Part # MCC-500 General Guidelines • It is the user’s responsibility to read and follow all instructions. • Keep these instructions with the product at all t Technical instruction manual for the Black Widow MCC-500 Automobile Accessories. It provides technical information on power requirements, assembly reference, device operation tips, troubleshooting.

K390
Whispbar K390
02.06.2026 14 pages

K390 Fitting Kit EN Fitting Instructions for Basic Carrier x 4 x 1 x 1 x 1 x 1 x 4 x 4 Revision No: 7G 1 Manual for installation and usage of the Whispbar K390 Automobile Accessories. The manual describes setup tips, firmware updates, repair references.