HP ProCurve 5400zl Manuals (PDF)

Advanced traffic management manual (460 pages)

Brand: HP
Model: ProCurve 5400zl
Format: PDF
Key Aspects: Technical Support and Resource Links, Standard Operating Procedures, Initial Startup Checklist
Updated: 10.09.2026
Source File: 1420109.pdf
Pages: 460
Description: HP 3500 series Advanced traffic management manual — 460-page document with rated values and dimensions, operating modes, plus compliance information.

Contents

HP Switch Software

1
Advanced Traffic Management Guide

3
8000 Foothills Boulevard, m/s 5551

4
6 Stack Management for the 3500, 3500yl, 6200yl

12
7 QinQ (Provider Bridging)

13
About Your Switch Manual Set

15
Software Feature Index

16
Access Control Lists (ACLs)

17
Dynamic ARP Protection

18
Key Management System

19
Policy-based Routing (PBR)

20
Secure FTP (IPv6)

21
USB Device Support

22
Static Virtual LANs (VLANs)

23
Figure 2-2. Example of GVRP Operation

95
Per-Port Options for Handling GVRP “Unknown VLANs”

96
GVRP and VLAN Access Control

100
Planning for GVRP Operation

101
Configuring GVRP On a Switch

102
GVRP Operating Notes

107
Multiple Instance Spanning-Tree Operation

109
Switch Meshing Fundamentals

195
Configuring Switch Meshing

200
Operating Notes for Switch Meshing

209
Quality of Service: Managing Bandwidth More

219
Stack Management for the 3500, 3500yl, 6200yl

321
QinQ (Provider Bridging)

365
Classifier-Based Software Configuration

397
Index – 1

447
2 – Index

448
Index – 3

449
4 – Index

450
Index – 5

451
6 – Index

452
Index – 7

453
8 – Index

454
Index – 9

455
10 – Index

456
Index – 11

457
12 – Index

458
Technology for better business outcomes

460

Pages Preview:

Access security manual (778 pages)

Brand: HP
Model: ProCurve 5400zl
Format: PDF
Key Aspects: System Connectivity and Wiring Basics, Step-by-Step Assembly Procedures, Information on Regular Maintenance
Updated: 20.08.2026
Source File: 1509203.pdf
Pages: 778
Description: What does the HP 3500 YL series Access security manual include? It describes technical specifications, assembly instructions, together with spare parts information.

Contents

HP Switch Software

1
Access Security Guide

3
8000 Foothills Boulevard, m/s 5551

4
Configuring a Connection-Rate ACL Using

10
IPv4 Counter Operation with Multiple Interface

20
14 Configuring and Monitoring Port Security

24
15 Using Authorized IP Managers

25
About Your Switch Manual Set

27
Software Feature Index

28
Access Control Lists (ACLs)

29
Dynamic ARP Protection

30
Key Management System

31
Policy-based Routing (PBR)

32
Secure FTP (IPv6)

33
USB Device Support

34
Access Security Features

36
Network Security Features

40
Getting Started with Access Security

43
Precedence of Security Options

49
HP PMC Identity Driven Manager (IDM)

54
Configuring Username and Password Security

55
Virus Throttling (Connection-Rate Filtering)

103
Web and MAC Authentication

133
Terminology Used in TACACS Applications:

206
General System Requirements

208
General Authentication Setup Procedure

209
Configuring TACACS+ on the Switch

211
How Authentication Operates

228
Messages Related to TACACS+ Operation

233
RADIUS Authentication, Authorization, and

235
Configuring RADIUS Server Support for

319
Configuring Secure Shell (SSH)

363
Configuring Secure Socket Layer (SSL)

403
IPv4 Access Control Lists (ACLs)

421
Configuring Advanced Threat Protection

551
Traffic/Security Filters and Monitors

589
Configuring Port-Based and

613
Configuring and Monitoring Port Security

691
Using Authorized IP Managers

735
Index – 1

757
2 – Index

758
Index – 3

759
4 – Index

760
Index – 5

761
6 – Index

762
Index – 7

763
8 – Index

764
Index – 9

765
10 – Index

766
Index – 11

767
12 – Index

768
Index – 13

769
14 – Index

770
Index – 15

771
16 – Index

772
Index – 17

773
18 – Index

774
Index – 19

775
20 – Index

776
Technology for better business outcomes

778

Pages Preview:

Installation and getting started manual (134 pages)

Brand: HP
Model: ProCurve 5400zl
Format: PDF
Key Aspects: End-of-Life Handling and Disposal, Component Overview and Descriptions, Glossary of Technical Terms
Updated: 04.05.2026
Source File: 457004.pdf
Pages: 134
Description: Installation and getting started manual: HP ProCurve 5400zl — component overview, operating modes and fault and error codes.

Contents

HP 5400 zl Switches

1
8000 Foothills Boulevard, m/s 5551

4
1 Introducing the HP 5400 zl Switches

5
C Safety and Regulatory Statements

9
Introducing the HP 5400 zl

11
Introducing the HP 5400 zl Switches

12
Installing the HP 5400 zl

31
Installing the HP 5400 zl Switches

32
Getting Started With Switch

63
Getting Started With Switch Configuration

64
Replacing Power Supplies

74
Replacing Fan Trays

76
Replacing the Management Module

77
Replacing the Management Module Compact Flash Card

78
Basic Troubleshooting Tips

82
Diagnosing with the LEDs

84
HP networking tools

89
Hardware Diagnostic Tests

90
Restoring the Factory Default Configuration

93
Downloading New Software

94
The HP zl Power Supply Specfications:.

95
CSA 22.2 No. 60950

97
Class 1 Laser

98
Cabling and Technology

99
Cabling and Technology Information

100
Safety and Regulatory

111
Safety and Regulatory Statements

112
Waste Electrical and Electronic

123
Index – 1

127
2 – Index

128
Index – 3

129
4 – Index

130
Index – 5

131
6 – Index

132
Installation and Getting Startd Guide

134

Pages Preview:

Quickspecs (101 pages)

Brand: HP
Model: ProCurve 5400zl
Format: PDF
Key Aspects: Safety Recommendations and Warnings, Error Code Explanations, Regulatory Compliance and Standards
Updated: 10.07.2026
Source File: 457005.pdf
Pages: 101
Description: The Quickspecs of the HP ProCurve 5400zl (101 pages) sets out assembly instructions, daily use recommendations, plus component replacement. Models HP 5406 zl Switch with Premium Software J9642A HP 5412 zl Switch with Premium Software J9643A HP…

Contents

HP 5406-48G zl Switch

1
HP 5412-92G zl Switch

2
HP 5406 zl Switch with Premium Software

3
Hot-swappable modules (5400 zl series)

6
Border Gateway Protocol (BGP)

7
Build To Order:

10
PDU CABLE NA/MEX/TW/JP

11
HP 5412-92G-PoE+-4G v2 zl Swch w Prm SW

12
HP X122 1G SFP LC BX-D Transceiver

13
44 autosensing 10/100/1000 port

14
C15 PDU Jumper Cord (ROW)

15
HP X121 1G SFP LC LH Transceiver

16
High Volt Switch to Wall Power Cord

20
HP 20p 10/100/1000 PoE+/4p MGBIC zl Mod

22
HP Advanced Services v2 zl Module w/ SSD

23
The following Upgrades install into this Module:

24
Maximum of this Module per Chassis:

25
HP X242 10G SFP+ 15m DAC Cable

26
HP Premier Flex LC/LC OM4 2f 30m Cbl

27
US Federal Government certifications

28
HP 5406 zl Switch with

29
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

30
32°F to 131°F (0°C to 55°C); 0°C to 40°C with

32
1000BASE-T: full only

34
2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE);

35
Voltage dips and

38
Hardware Exchange (HS752E)

39
-40°F to 158°F (-40°C to 70°C)

40
4 power supply slots

42
MAC address table size

45
and SW updates (UY911E)

46
RFC 1591 DNS (client)

47
RFC 3019 MLDv1 MIB

48
IEEE 802.1AB Link Layer Discovery Protocol

49
HP 5400 zl Switch Series

50
NEW HP MSM775 zl Premium Controller Module

52
HP 4-Port 10 GbE X2 zl

54
HP 20-port Gig-T PoE+/4-

56
HP 12-port Gig-T

57
HP 20-Port 10/100/1000

58
HP 24-port Mini-GBIC zl

59
HP 24-port Gig-T PoE+ v2

60
HP 24-port 10/100 PoE+

61
HP 20-port Gig-T/4-port

62
installed in the left side of the chassis.

65
HP X131 10G X2 SC ER

67
HP X131 10G X2 CX4

69
HP X131 10G X2 SC LR

70
HP X131 10G X2 SC LRM

71
HP X112 100M SFP LC BX-D

72
0.5-10,000 m (single-mode fiber)

73
HP X132 10G SFP+ LC LRM

75
HP X121 1G SFP LC LH

76
HP X121 1G SFP RJ45 T

78
HP X122 1G SFP LC BX-D

79
• Cable Diameter: 0.180"

82
HP X242 SFP+ to SFP+ 10m

83
maximum numbers provided for planning the

84
HP X244 XFP SFP+ 3 m

85
HP 0.5 m Multimode OM3

86
HP 1 m Multimode OM3

87
HP 2 m Multimode OM3

88
HP 5 m Multimode OM3

89
HP 15 m Multimode OM3

90
HP 30 m Multimode OM3

91
HP 50 m Multimode OM3

92
HP Premier Flex LC/LC

93
HP 1500 W PoE+ zl Power

96
HP 1500 W zl Power

97
HP 875 W zl Power Supply

98
HP 5400 zl Premium

100
Real-Time Location Services (RTLS)

101

Pages Preview:

Installation and getting started manual (118 pages)

Brand: HP
Model: ProCurve 5400zl
Format: PDF
Key Aspects: System Connectivity and Wiring Basics, Performance Optimization Tips, Routine Functionality Testing
Updated: 04.07.2026
Source File: 456943.pdf
Pages: 118
Description: HP ProCurve 5400zl Installation and getting started manual: 118 pages of rated values and dimensions, connection and wiring, and also periodic checks. ProCurve Series 5400zl Switches Installation and Getting Started Guide…

Contents

Getting Started Guide

1
ProCurve Series 5400zl Switches

3
8000 Foothills Boulevard, m/s 5552

4
1 Introducing the ProCurve Series

5
8. (Optional) Connect a Power Supply Shelf

6
D Recycle Statements

9
Introducing the ProCurve

11
Introducing the ProCurve Series 5400zl Switches

12
Installing the Series 5400zl

25
Installing the Series 5400zl Switches

26
Getting Started With Switch

55
Getting Started With Switch Configuration

56
Replacing Power Supplies

62
Replacing Fan Trays

64
Replacing the Management Module

65
Replacing the Management Module Compact Flash Card

66
Replacing the Management Module Battery

67
Basic Troubleshooting Tips

70
Diagnosing with the LEDs

72
Hardware Diagnostic Tests

78
Restoring the Factory Default Configuration

80
Downloading New Code

81
Running H/F 1

85
The following products are Class 1 Laser Products.

86
Switch Ports and Network

87
Switch Ports and Network Cables

88
Safety and Regulatory

97
Safety and Regulatory Statements

98
Waste Electrical and Electronic

107
Index – 1

111
2 – Index

112
Index – 3

113
4 – Index

114
Index – 5

115
6 – Index

116
Technical information in this document

118

Pages Preview:

Reference manual (765 pages)

Brand: HP
Model: ProCurve 5400zl
Format: PDF
Key Aspects: Basic Configuration Guidelines, Detailed Installation Instructions, System Connectivity and Wiring Basics
Updated: 17.06.2026
Source File: 1397874.pdf
Pages: 765
Description: Reference manual: HP ProCurve 5400zl — getting started, component replacement, together with compliance information. HP ProCurve 3500yl Switches 5400zl Switches 6200yl Switch 8200zl Switches Command Line Interface Reference Guide April…

Contents

ProCurve 5400zl Switches

1
Command Line Interface Reference Guide

3
© 2009 Hewlett-Packard Development Company, L.P.

16
KMS (Key Management System)

20
802.1X, Accounting, Switch Security

23
unauth-vid (p. 53)

28
[no] aaa port-access authenticator active

29
no specific MAC address filter on the port.

32
Next Available Option:

33
[no] aaa port-access web-based ewa-server

36
The first form of the command sets the

40
aaa authentication num-attempts < 1 to 10 >

44
Range: < 0 to 9999999 >

50
none -- Do not use backup authentication methods.

51
o -

55
to use, if the primary authentication

57
OVERVIEW FOR IPV4 ACLS

61
Displaying ACL Data:

64
Usage: no arp IP-ADDRESS

66
[no] arp-protect vlan

69
copy usb (page 133)

70
AES 128 encryption key string for Autorun

71
the section called “client” (page 685)

72
show (page 511)

74
reload (page 467)

75
the section called “cdp” (page 537)

78
Usage: chassislocate [<1-1440>]

79
Turn the chassis locate led off.

80
policy (page 398)

81
class resequence ipv4 IPV4 < 1 to 2147483647 >

82
logging (p. 84)

85
Clear all IPv6 information.

86
ip (page 290)

88
clock set [TIME]

90
end (page 173)

91
filter (page 185)

92
Sets the level of filtering required

93
ProCurve(config)# write memory

95
console inactivity-timer < 0 | 1 | 5 | ... >

96
console terminal < VT100 | NONE | ANSI >

97
Usage: copy [options]

98
append -- Add the key(s) for access. (p. 102)

102
copy tftp pub-key-file IPV6-ADDR FILENAME append

105
copy tftp autorun-cert-file

107
Copy data to specified configuration file.

109
Copy to primary/secondary flash.

110
primary -- Copy image primary flash.

111
Specify filename for the TFTP transfer.

113
Next Available Options:

115
copy crash-data SLOT-ID-RANGE usb FILENAME

116
copy tftp command-file IPV6-ADDR FILENAME pc

123
Copy running configuration file.

125
usb -- Copy data to a USB flash drive.(p. 133)

126
Copy data to a TFTP server.

127
copy crash-log SLOT-ID-RANGE tftp IP-ADDR

130
copy tftp command-file IPV6-ADDR

131
Specify TFTP server IPv6 address.

132
Change CR/LF to unix style.

134
copy crash-data mm usb

136
Copy data to a USB flash drive.

137
copy crash-log SLOT-ID-RANGE xmodem

138
the section called “crypto” (page 544)

140
crypto key generate ssh rsa bits

142
Common name [e.g., IP address of device].

143
CG -- Congo

144
GW -- Guinea-Bissau

145
MM -- Myanmar

146
SE -- Sweden

147
ZM -- Zambia

148
crypto host-cert zeroize

151
log (page 361)

152
DD -- Display DD packets sent/received. (p. 152)

153
[no] debug dhcp-snooping agent

154
Display Hello packets sent/received.

156
Display new LSAs added to database.

157
[no] debug ipv6 dhcpv6-client packet

158
[no] debug wireless-services SLOT-ID-RANGE

159
Usage: [no] dhcp config-file-update

160
Usage: [no] dhcp-relay

161
[no] dhcp-relay option 82

163
dhcp-relay option 82 keep

165
dhcp-relay option 82 keep mgmt-vlan

166
dhcp-relay option 82 append validate

167
Usage: [no] dhcp-snooping

168
dhcp-snooping database delay < 15 to 86400 >

170
Usage: [no] dhcp-snooping verify

172
Usage: dir []

173
exit (page 176)

174
the section called “config” (page 540)

176
startup-config (p. 175)

177
Usage: [no] fastboot

179
interface (page 204)

180
low -- Low sensitivity.

181
Expire on reboot

186
connection-rate-filter (page 90)

187
port-list (p. 188)

188
Usage: [no] front_panel_security

192
[no] front-panel-security password-clear

193
walkMIB (page 754)

194
snmp-server (page 612)

196
the section called “igmp” (page 556)

197
[no] igmp-proxy-domain DOMAIN-NAME IP-ADDR

199
Usage: [no] include-credentials

200
o high - Preconfigured high threshold value.

202
[no] instrumentation monitor

203
mac-address-count -- Mac address count.

205
show interfaces (page 560)

206
propagation-delay (p. 266)

216
Usage: [no] ip access-group in

217
Usage: [no] ip access-group

218
The VLAN for which the configuration is

220
Process the request for all IP addresses.

222
Specify an OSPF area.

224
Single integer or IP address style dotted decimal.

225
OSPF authentication key (maximum 8 characters).

226
none -- Do not use authentication.

227
Automatic address configuration.

228
[no] interface vlan VLAN-ID ip bootp-gateway

230
Set dead interval in seconds; the default is 40.

232
Usage: vlan < vid > ipv6 mld forward < port-list >

237
The timers must follow the constraints

238
Range: < 5 to 300 >

239
[no] interface vlan VLAN-ID ip igmp

240
Set limits for all inbound traffic.

241
interface vlan VLAN-ID ip

243
Specify the IP address the request is for.

244
interface vlan VLAN-ID ip pim-dense ip-addr

245
Usage: [no] ipv6 ...

247
[no] interface vlan VLAN-ID ip irdp

248
interface vlan VLAN-ID ip ospf md5-auth-key-chain

252
If not preceded by 'no',

254
Usage: [no] ip ospf [...]

259
Range: < 0 to 100 >

261
interface [ETHERNET] PORT-LIST poe-allocate-by

263
[no] interface vlan VLAN-ID ip rip poison-reverse

264
[no] interface vlan VLAN-ID ip proxy-arp

270
[no] interface vlan VLAN-ID ipv6 nd reachable-time

275
V1-only -- Use RIP version 1 only.

277
o - Policy name.

278
network speed (100 or 1000 Mbps)and the port

279
Usage: [no] voice

286
ipv6 (page 313)

292
server-address (p. 308)

295
ip igmp auto [ETHERNET] PORT-LIST

298
[no] ip access-list connection-ra

299
[no] ip directed-broadcast

300
ip ssh port TCP/UDP-PORT

305
Usage: ip load-sharing <2-4>

306
ip ssh public-key < manager | operator >

308
Usage: ip icmp reply-limit

309
Description: Define the device router id.

310
function unless SSH is also enabled.

312
ip arp-age < 1 to 1440 >

313
Usage: [no] ip source-binding trap OutOfResources

314
show ipv6 (page 562)

315
the section called “jumbos” (page 564)

321
send-lifetime -- Set key send lifetime. (p. 336)

323
time -- Key send stop time. (HH:MM[:SS]) (p. 338)

325
Key send start date.

326
Key accept stop date.

329
Use current day and time.

332
infinite -- Set infinite lifetime.(p. 332)

340
Key send stop time.

341
the section called “ssh” (page 593)

346
show licenses (page 565)

348
uninstall (p. 348)

349
For Premium features

350
Usage: link-keepalive interval <10-100>

351
ping (page 392)

352
timeout (p. 351)

353
show lldp (page 566)

354
Specify the ca-value string.

357
lldp fast-start-count < 1 to 10 >

359
Specify the MED TLV List to be advertised.

360
Usage:[no] lldp run

361
the section called “lockout-mac” (page 566)

362
logging (page 363)

363
-M -- Major event class.

364
severity (p. 366)

366
[no] logging IP-ADDR

367
Usage: [no] log-numbers

370
Usage: [no] loop-protect <...>

372
loop-protect disable-timer < 0 to 604800 >

373
Usage: mac-age-time <60-999960>

374
the section called “vlan” (page 603)

375
Usage: max-vlans <1-2048>

376
the section called “mesh” (page 569)

378
mirror < 1 to 4 > remote ip IP-ADDR < 1 to 65535 >

382
vlan (page 706)

383
the section called “modules” (page 570)

385
show monitor (page 570)

387
number or (if configured) a name.

388
Usage: [no] page

389
front-panel-security (page 190)

390
password < operator | manager > plaintext PASSWORD

392
password < operator | manager > sha1

393
traceroute (page 690)

394
Example: ping IP-ADDR

395
The stack number of the switch to ping.

396
ProCurve# ping6 80fe::20b:cdff:fedd:9a62

398
Source address or VLAN.

399
class (page 79)

400
[no] policy mirror MIRROR

401
show power-over-ethernet (page 581)

405
Example: power-over-ethernet threshold option

406
power-over-ethernet slot SLOT-ID-RANGE

407
Usage: print COMMAND-STR

409
svlan (page 661)

411
Protocol | Port

417
priority of the outgoing packets is defined by the

418
Usage: [no] qos device-priority

420
qos device-priority IP-ADDR/mask-LENGTH dscp

421
Binary formatted value from 000000 to 111111

422
Specify the DSCP code-point in decimal.

426
qos < udp-port | tcp-port > ipv4

427
qos < udp-port | tcp-port > TCP/UDP-PORT

429
Specify priority to use.

431
IETF Standard Designation

437
of each packet.

456
show radius (page 583)

458
radius-server dyn-autz-port < 1024 to 49151 >

462
radius-server key KEY

463
repeat (page 470)

464
Usage: redundancy switchover

465
ProCurve(config)# show redundancy

466
boot (page 73)

469
redo (page 462)

472
ProCurve(config)# router vrrp

476
Range: < 1 to 255 >

483
Summarize routes matching address/MASK pair.

487
Usage: [no] restrict IP-ADDR/MASK-LEN

488
router pim state-refresh < 10 to 300 >

491
Dr, or Backup).

492
Usage: [no] trap

493
Usage: [no] savepower <1|2|3>

496
Usage: services [ |(name )|

497
services SLOT-ID locator blink

498
services SLOT-ID locator on

499
Blink the locate led

501
services SLOT-ID reload

502
Usage: services [ |(name )]

503
Number of minutes duration (default 30).

504
A value to which to set the MIB object.

507
Usage: setup [default-logon ]

508
mgmt-interfaces (p. 507)

509
sflow-sampler-off (p. 510)

511
[no] sflow < 1 to 3 >

512
Usage: show ...

513
source-port -- (p. 592)

515
view -- Show views. (p. 602)

523
rip (p. 586)

526
trunks (p. 600)

527
show port-access mac-based [ETHERNET] PORT-LIST

528
show ip ospf external-link-state advertise

531
Usage: show ip ospf area [OSPF-AREA-ID]

532
Usage: show authentication

533
show ip authorized-managers

534
Show Autorun configuration status.

535
Usage: show banner motd

536
show stack candidates

539
show ip client-public-key

540
Show the current web client session statistics.

541
show access-list config

542
Description: Show LLDP configuration information.

543
show instrumentation monitor configuration

545
show tech custom

547
show sflow < 1 to 3 > destination

548
Usage: show services details

550
vlan -- VLAN acl

551
show ip pim bsr elected

552
Usage: show filter [INDEX]

554
Usage: show front-panel-security

555
show ip helper-address

557
fingerprint -- Display hexadecimal hash.(p. 552)

558
Show the spanning tree instance information.

560
Range: < 0 to 16 >

561
show ip rip interface

562
show ip mroute IP-ADDR

564
Usage: show lacp

567
Usage: show lockout-mac

569
of MAC Authentication is shown.

571
show ipv6 mld

572
Usage: show monitor

573
show spanning-tree root-history msti < 1 to 16 >

574
show policy NAME

575
show ip rip peer IP-ADDR

578
show statistics < policy > POLICY-NAME

579
show system power-supply

584
Usage: show ip rip redistribute

587
show ip ospf restrict

588
Usage: show ipv6 routers vlan

590
show sflow < 1 to 3 > sampling-polling

591
community -- Show SNMPv3 Community table. (p. 539)

594
show spanning-tree [mst-config] |

595
show link-keepalive statistics

597
show dhcp-snooping stats

598
show qos tcp-udp-port-priority

600
show connection-rate-filter throttled-hosts

601
show spanning-tree traps

602
show statistics < aclv6 >

603
Show the list of devices that are stack members.

605
show dhcp-relay bootp-gateway vlan

606
show ip mroute interface VLAN-ID

609
Usage: show vrrp [...]

611
Usage: show wireless-services vlans

613
snmp-server host IPV6-ADDR

617
snmp-server contact CONTACT

618
Description of the switch location.

621
Range: < 1 to 21474836 >

623
show snmpv3 (page 591)

625
sec-model (p. 631)

627
Set authentication protocol.

628
show sntp (page 592)

636
[no] sntp server priority < 1 to 3 > IP-ADDR

637
Version of the SNTP server.

638
show spanning-tree (page 592)

639
vlan (p. 653)

643
Range: < 0 to 65535 >

644
[no] spanning-tree pending instance < 1 to 16 >

648
[no] stack commander ASCII-STR

657
password (p. 656)

658
show config (page 540)

659
primary -- Primary flash image.

660
the section called “static-mac” (page 594)

661
qinq (page 409)

663
ipv6 address 1234:abcd::5678/40

667
Specify DSCP policy to use.

669
Usage: [no] ip ...

670
o 1-4 - Mirror destination number

672
[no] svlan VLAN-ID protocol PROTOCOL-GROUP

673
Trk15 -- Trunk group 15

678
To change global system parameters

679
[no] tacacs-server host IP-ADDR

681
Usage: [no] task-monitor FEATURE

682
IPv6 address of the device to connect to.

684
the section called “console” (page 543)

685
the section called “terminal” (page 598)

686
Usage: [no] tftp [client|server]

687
Example: timesync sntp

689
traceroute HOST-NAME probes < 1 to 5 >

695
traceroute6 IPV6-ADDR probes < 1 to 5 >

700
switch-interconnect (page 675)

702
Trk24 -- Trunk group 24

704
Description: Enter Monitor ROM Console.

705
Usage: upgrade-software SOFTWARE-KEY

706
show vlans (page 607)

708
nd (p. 737)

715
Usage: [no] ip irdp

717
vlan VLAN-ID ip ospf all area

719
vlan VLAN-ID ip ospf all area backbone

722
[no] vlan VLAN-ID ipv6 address dhcp

724
[no] vlan VLAN-ID ipv6 enable

725
[no] ipv6 mld fastleave < port-list >

726
[no] vlan VLAN-ID service-policy SERVICE-POLICY in

730
[no] vlan VLAN-ID ip rip IP-ADDR

732
[no] vlan VLAN-ID ip pim-dense lan-prune-delay

735
Usage: [no] ip irdp maxadvertinterval <4-1800>

736
vlan VLAN-ID name NAME

739
authentication -- Disable authentication.(p. 717)

741
Usage: [no] ip pim-dense [...]

742
[no] vlan VLAN-ID ip rip poison-reverse

743
Range: < 1 to 600 >

744
Range: < 0 to 255 >

745
V1-only -- Accept RIP version 1 updates only.

748
V1-only -- Send RIP version 1 updates only.

750
vlan VLAN-ID ip ospf transit-delay < 1 to 3600 >

751
vlan VLAN-ID qos dscp < af11 | af12 | af13 | ... >

754
getMIB (page 192)

756
[no] web-management management-url

758
Reboot wireless-services module.

760
Usage: wireless-services SLOT-ID

762

Pages Preview:

Replacement instructions (2 pages)

Brand: HP
Model: ProCurve 5400zl
Format: PDF
Key Aspects: Advanced Configuration Methods, Additional Modules and Accessories Guide, Model Variations and Compatibility
Updated: 21.04.2026
Source File: 1799107.pdf
Pages: 2
Description: Quick access to the HP ProCurve 5400zl Replacement instructions: product description, compatibility requirements, and also cleaning instructions. Replacement Fan Tray Instructions for the ProCurve Series 5400zl Switches The fan tray is hot swappable. It can be…

Pages Preview:

Access security manual (390 pages)

Brand: HP
Model: ProCurve 5400zl
Format: PDF
Key Aspects: End-of-Life Handling and Disposal, Component Overview and Descriptions, Troubleshooting Information
Updated: 18.04.2026
Source File: 1619218.pdf
Pages: 390
Description: Open this Access security manual to see how the HP ProCurve 6200yl Series works: it summarizes assembly instructions, operating modes, and also periodic checks. 6200yl Access Security Guide 5400zl 3500yl ProCurve Switches K.11.XX www.procurve.com…

Contents

Access Security Guide

1
Series 5400zl Switches

3
2 Configuring Username and Password Security

6
8 Configuring Secure Socket Layer (SSL)

11
About Your Switch Manual Set

17
Factory Default Settings

19
Network Management Applicatio

20
Command Syntax Statements

25
Sources for More Information

27
Need Only a Quick Start?

30
To Set Up and Install the Switch in Your Network

31
Overview of Access Security Features

32
General Switch Traffic Security Guideline

33
Applications for Access Control Lists (ACLs)

34
Configuring Username and Password Security

35
Global Configuration and Sensitivity

59
General Operation of Connection-Rate Filtering

61
Bridged Traffic: See “Switched Traffic”, below.

63
General Configuration Guidelines

65
Basic Connection-Rate Filtering Configuration

67
Configuring and Applying Connection-Rate ACLs

76
Connection-Rate Log and Trap Messages

87
Web and MAC Authentication

89
view the switch’s authentication configuration

120
Terminology Used in TACACS Applications:

121
General System Requirements

123
General Authentication Setup Procedure

124
Configuring TACACS+ on the Switch

126
How Authentication Operates

138
Messages Related to TACACS+ Operation

143
RADIUS Authentication and Accounting

145
Configuring Secure Shell (SSH)

181
Configuring Secure Socket Layer (SSL)

209
Filter Types and Operation

233
Configuring Traffic/Security Filters

247
Configuring Port-Based and

255
Configuring and Monitoring Port Security

313
Using Authorized IP Managers

357
Key Management System

371
3DES … 7-3, 8-3

379
suspended VLAN … 10-49

380
aaa authentication … 5-8

381
operation … 1-10, 3-5

382
See KMS key chain.

383
security configuration … 11-3

384
authentication, web … 6-10

385
host key pair … 8-10

386
802.1X … 10-53

387
10 – Index

388
Technical information in this document

390

Pages Preview:

Software update npi technical training (18 pages)

Brand: HP
Model: ProCurve 5400zl
Format: PDF
Key Aspects: Product Performance Metrics, Hardware Setup Instructions, Regulatory Compliance and Standards
Updated: 09.08.2026
Source File: 1397875.pdf
Pages: 18
Description: Read the HP ProCurve 6200yl Series Software update npi technical training to learn about rated values and dimensions, programming options and warranty terms. 3 Traffic Mirroring Allows you to monitor traffic to detect threats or troubleshoot problems Advantages • Allows you to…