-
HPE StoreEver LTO-5 and LTO-6 Failover
1
-
1. Ultrium Dual Port Fibre Channel Tape Drives
8
-
Basic path failover
9
-
1. Primary data path
10
-
Example Logical Unit
13
-
Library controller path failure recovery
15
-
Enabling basic path failover
16
-
Installing advanced path failover
18
-
Preparing the library
19
-
Configuring failover for the ESL G3 Tape
21
-
Configuring failover for the ESL G3 Tape Libraries
25
-
SAN configuration requirements
29
-
Verifying control path failover
30
-
Configuring failover for the MSL3040 or
32
-
Configuring failover for other MSL Tape
37
-
Figure 8: Enabling data path port failover
38
-
Figure 9: Standby and active ports
39
-
Installing and using Windows advanced path
43
-
Uninstalling the drivers
45
-
Table 2: Application path list
46
-
Figure 13: Driver and system organization
47
-
Multi-path intermediate class driver
48
-
Figure 14: Drivers and device objects
49
-
Device manager view
50
-
Figure 16: Library configuration example
51
-
Installing and using Linux advanced path
52
-
Full Balancing algorithm
54
-
1:0:0:1 up - - active_drive
56
-
Installing and using HP-UX advanced path
59
-
Troubleshooting failover operation
64
-
Failed host bus adapter ports
65
-
Confirming failover operation
66
-
Failover session established
67
-
Figure 19: Report Device menu item
70
-
Table 5: Local SMC device server information
71
-
Figure 24: Enable Logging dialog
73
-
Memory dump setup
74
-
1. To minimize the level of debug messages:
75
-
Message and description
77
-
Advanced troubleshooting techniques
79
-
Support and other resources
81
-
Additional warranty information
83
-
Known issues and workarounds
84
-
Data Protector device discovery with advanced
88
-
Troubleshooting Commvault Simpana device
90
