HRS FH67 Series Manuals

1 2019.10 0.5mm Pitch, 3.57mm depth One Action Lock, Vertical connection FPC/FFC/Shield FFC connector FH67 Series One Action Lock (Dimension diagram : 30pos.) Fig.1 3.57mm 21.08mm 5.2mm High FPC retention force FPC/FFC can be checked from the top surface after mating. Fig.4 Fig.5 Insert FPC/FFC without opening the lock lever before insertion! Two-point contact design for dust prevention Two-point independent spring contact Fig.2 Supports FPC/FFC/Shield FFC Fig.3 Ground contact and FFC Ground plate contact at multiple points. Shield FFC Ground contact Viewing section Cannot see viewing section Robust lock firmly retains FPC/FFC. ○ ： Mated condition × ： Insufficient insertion condition NEW In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. ■Features 1. Automatic one action lock design One action locking by simply inserting FPC after mounting contributes to enhanced workability. (Fig.1) (Lock release by operating the lock lever when removing.) · Operation of the lock lever is not required at the time of mating FPC. Can be inserted with one hand. Contributes to reduced assembly time. The lock lever will not be damaged by operation. Mating failure due to FPC displacement does not occur during lock lever operation. 2. Two-point contact prevents contact failure by dust · High contact reliability by independent spring two-point contact design, preventing contact failure due to dust. (Fig.2) 3. Supports FPC/FFC/Shield FFC · FH67 allows you to choose from FPC/FFC/Shield FFC. · Shielded FFC is acceptable for EMI prevention. (Fig.3) 4. High FPC retention force · The circuit is automatically locked after FPC/FFC is inserted by a one action. The notches on both sides of FPC are held by the lock lever, generating a high FPC retention force in spite of the small contact. (Fig.4) 5. Visual inspection on the mated status of FPC/FFC is possible · Insufficient insertion during assembly is prevented due to lock lever protrusion after FPC/FFC insertion. (Fig.5) 6. Environmental · Halogen free *As defined by IEC 61249-2-21. Br : 900ppm max, Cl : 900ppm max, Br+Cl : 1,500ppm max Shielded FFC is acceptable for EMI prevention Sep.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved.