Hubbell Kim Pavilion PA7R Manuals

Kim Pavilion 7” Concrete Bollard, Installation Instructions 17760 Rowland St. City of Industry, CA 91748 626/968-5666 10/28/20 EC 180814007 Rev A Part No. 93088555 Page 1 Tools Required: q #2 Phillips Screwdriver q 3/4” Deep Socket, 6- or 12- point q Rachet Driver q Rachet Driver extension q 1/8” Hex Key q 9/16” Wrench Make certain electrical supply is OFF before starting fixture installation. ! 1. To protect finish, lay concrete bollard horizontally on wood blocks. 2. Install the four anchor plates using the four 3/8”-16 hex bolts provided. A 9/16” wrench is needed. WARNING: Fixtures must be grounded in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury. NOTE: All wiring must be done by a qualified electrician. Luminaires provided with receptacle outlet panel, (42A-ROP / 42A-ROP-L), shall be provided with instructions to install weather resistant receptacles suitable for wet locations. KEEP THIS SHEET FOR FUTURE REFERENCE. !