Human Touch AcuTouch 6.0 Manuals

REMOVING THE BACKREST ACTUATOR 1. Power off the chair and unplug it. 2. Using a Phillips-head screwdriver, remove the two screws from the safety sensor plate on the back of the chair (Fig.1). 3. Pull the safety sensor cover backward to expose the zipper that connects the safety sensor cover to the chair (Fig.2). 4. Using a paper clip, open the zipper, then remove the safety sensor cover (Fig.2). 5. Carefully lift the safety sensor cover away from the chair (Fig.3). Tools Required: Phillips-head screwdriver, wire cutter or any other instrument suitable for cutting zip ties, paper clip. NOTE: SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY REPLACING THE MAIN PCB April 04, 2012 It is imperative that Human Touch® products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair. SERVICE LEVEL: 3 (Fig.1) (Fig.2) (Fig.3) AcuTouch® 6.0 Safety sensor cover Safety sensor cover Safety sensor cover Zipper 1 Main PCB

AcuTouch® 6.0 Human Touch® Massage Chair troubleshooting guide