Human Touch ht 5320 Manuals

1. Power off the chair and unplug it. 2. Once the backrest actuator is removed, the backrest swings freely. Therefore, it is necessary to do one of the following: • If the backrest was in a reclined position when the actuator failed, place a sturdy object such as a heavy box or ottoman under the backrest for support (Fig.1). • If the backrest was in an upright position when the actuator failed, have a second person stand behind the chair and hold the backrest firmly in place with both hands for the duration of this procedure. REMOVING THE ACTUATOR 1. Locate the connector box underneath the chair on the right-hand side (Fig.2). 2. Using a small Phillips-head screwdriver, remove the two screws that secure the connector box cover, then remove the cover. Tools Required: Small Phillips-head screwdriver, short-handled Phillips-head screwdriver NOTE: This procedure can be completed by one person if the backrest is in a reclined position. If it is in an upright position, a second person is necessary to hold it in place during this procedure. SAVE ALL SCREWS FOR USE DURING REASSEMBLY GET READY (Fig.1) X1103 REPLACING THE BACKREST ACTUATOR HT-5320 06/01/08 (Fig.2) Connector box Connector 1 To ensure that Human Touch® products are repaired in a manner that is fully consistent with the practices used during the manufacturing process, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these product repair instructions. SERVICE LEVEL: 3

ht 5320 ©2007 Human Touch®, LLC. Patents pending and intellectual property rights enforced. No medical claims are warranted or implied by the use of this product. Human Touch is a trademark of Human Touch®, LLC. H T- 5 3 2 0 - 3 L - A 0 humantouch.com use & care manual 800.355.2762 ENG FRC ESN use & care manual mode d’emploi et d’entretien manual de uso y cuidado