Husky WSH72FWB Manuals

Item # 1002718711 Model # WSH72FWB THANK YOU We appreciate the trust and confidence you have placed in Husky through the purchase of this Husky Folding Workbench. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Husky! USE AND CARE GUIDE Husky Folding Workbench Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday 9 a.m. – 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM 2 Table of Contents Table of Contents .......................................................... 2 Safety Information ......................................................... 2 Limited Lifetime Warranty ............................................ 2 Pre-installation .............................................................. 3 Planning Installation ................................................... 3 Tools Required ........................................................... 3 Hardware Included ..................................................... 3 Package Contents ...................................................... 3 Installation ..................................................................... 4 Care and Cleaning ........................................................ 7 Maintenance .................................................................. 7 Troubleshooting ............................................................ 7 Service Parts ................................................................. 8 Safety Information □ The product is not recommended for outdoor use. □ To avoid damage, assemble the product on a sturdy, level surface. □ Two or more persons must work together to install the unit onto the wall. □ Make sure all bolts/screws are tightly fastened before the unit is used. □ Check bolts/screws periodically. Tighten the bolts when loose. □ Load Capacity: 362.8 kg / 800 lb. Evenly distributed. Limited Lifetime Warranty This product is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship, the manufacturer will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled incorrectly, misused, abused by overloading, altered in any way, or damaged due to accident. This warranty is not transferable and does not cover chipping, flaking, scratches, rust, dents, or other damages to the surfaces of this product. Responsibility of the manufacturer is limited to repair or replacement of this product. The manufacturer is not responsible for consequential, incidental, or other damages or losses resulting from product failure. This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Contact the Customer Service Team at 1-888-HD-HUSKY or visit www. HUSKYTOOLS.COM. NOTE: Please read and understand these instructions before assembling and using this product. Save these instructions for future reference. WARNING: Do not allow children to climb or play in or around this product. WARNING: Use with products heavier than the maximum weight limits indicated may result in product instability and may cause injury. Distribute weight evenly. Load Capacity: 362.8 kg / 800 lb Evenly distributed 3 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance. Pre-installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Unpack the unit and compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not assemble this product and contact the Customer Service Team at 1-888-HD-HUSKY or visit www. HUSKYTOOLS.COM. TOOLS REQUIRED HARDWARE INCLUDED NOTE: Hardware not shown to actual size. PACKAGE CONTENTS Part Description Quantity AA Wood screw M8*60mmL 2 + 1 extra Part Description Quantity A Folding Workbench 1 AA A Drill Bit Level Ruler Pencil Wrench Phillips screwdriver 4 Installation 1 Adjusting the height □ Loosen the hex bolt (JJ), the flat washers (SS) and the hex nut (WW) with a wrench. □ Adjust each leg to the achieve desired height. □ Tighten the hex bolt (JJ), the flat washers (SS) and the hex nut (WW) with the wrench. 2 Unfolding the table □ Stand the unit upright. □ Turn the side frame as shown to unfold the table. SS WW 28 in. ~ 42 in. SS JJ