Hydro AutoDose 1170 Manuals

10094778 Rev B 11/10 © Hydro Systems Company, Inc. 2010 HydroSystemsCo.com Toll Free: 1.800.543.7184 1 This guide contains instructions for installing, programming, and troubleshooting the AutoDose™ Dispensing System. Throughout the guide, the following icons are used to indicate the model(s) to which each step pertains. AutoDose™ Automatic Dispensing System The AutoDoseTM is a battery or A/C-powered peristaltic pumping dispenser that runs automatically at preset times as programmed with an electronic timer / control. Product operates reliably and consistantly, even in demanding environments. ! Please use this equipment carefully and observe all warnings and cautions. ALWAYS observe safety and handling instructions of the chemical manufacturers. ALWAYS direct discharge away from you or other persons or into approved containers. ALWAYS dispense cleaners and chemicals in accordance with manufacturer’s instructions. Exercise CAUTION when maintaining your equipment. KEEP equipment clean for proper operation. WEAR protective clothing and eyewear when working in the vicinity of all chemicals, filling or emptying equipment, or changing tubes. ALWAYS re-assemble equipment according to instruction procedures. Be sure all components are firmly screwed or latched into position. Ensure that hoses and electrical wires are properly placed and not kinked or pinched. ONLY USE ALKALINE BATTERIES. Tube life will vary depending on the type of treatment product used. To prevent emergency service, schedule replacement at least once per year. NOTE: The batteries should be scheduled for periodic replacement. Using a total of 40 running (pumping) hours, create a schedule for servicing the unit and changing the batteries. Maintaining the power source as such will help to provide the proper dosing by providing a more consistent pumping rate.  Models: Mounts: Power: Pail Mount (3.5 – 5 gal pail) 8 D-cell batteries Wall Mount 8 D-cell batteries Wall Mount A/C Power or 8 D-cell batteries 1170 1180 1190 AutoDose™ Dispenser Specifications: PUMP Flow Rate Approx 3.5 oz / min Tube Material EPDM Inlet Vacuum 20+ in Hg Outlet Pressure 20 psi SYSTEM CABINET Material Polypropylene and ABS Size (Model 1170) Approx. 7 3/4” tall X 14” diameter (does not include container 1170 model system sits on) Size (Models 1180 and 1190) 4 3/4” X 6 3/4” X 8 1/3” PROGRAMMABLE TIMER / CONTROL Program Duration Daily / Weekend / Week Days/Special Maximum # of Events 24 Dispense Amount per Event 1 oz – 30 oz (dispensed in 1 oz increments) or 30 – 900 ml (dispensed in 30 ml increments) This package should contain: • One AutoDoseTM dispenser INSTALL PACKAGE CONTAINING: • Ceramic weight and strainer for inlet tubing • Polyethylene tubing (10 ft) • Cable ties • Mounting Bracket (Some Models) • AC Adapter (Some Models) • Injection Fitting