I-Tech DHK Manuals

DHK OSD Quick Reference l-TECH COMPANY i-Tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: [email protected] WEB: www.iTechLCD.com OSD Quick Reference The On Screen Display (OSD) is adjusted as follows: 1. Press the Menu Button (See Diagram 1) Located on the OSD keypad Overlay. 2. Use the navigation buttons to maneuver through the OSD menu 3. Select the desired OSD Menu from the Screen Shots below to make the desired adjustment(s). 4. Press the Exit Button to exit out of the OSD Menu's when complete. Diagram 1: OSD Kepad Located on Monitor Face ten O Solid Green - Normal Operation c *■ O Flashing Amber - Sleep Mode or No Signal O Solid Amber ■ Power Standby Mode Power: Turns Unit On and Off LED: Indicates status of LCD screen Menu: Enters the OSD Menu Select: Used in the Menu(s) to make Selection Auto: Used to Auto Sync an aRGB Signal (Hot Key) Down: Used Inside of Menu to Navigate Down Direction Left: (Hot Key) Contrast Decrease. Inside Menu Navigation to the Left. Decrease: When Item is selected used to decrease its value. Right: (Hot Key) Contrast Increase Inside Menu Navigation to the Right. Increase: When Item is selected used to decrease its value. Source: (Hot Key) Scroll through Inputs (VGA, DVI, S-Video, CVS) Exit: Used inside of menu to exit a function or Menu Page 1 OSD Quick Reference I Biachtewe! Main Menu Sub Menu Operation Input Source ARGB -Change input signal source to Analog RGB. Input Source CM -Change input signal source to D\/1. Input Source S Video -Change input signal source to S-udeo. Input Source Composite -Change input signal source to composite udeo, Input Source Exit -Go back to main menu. Main Menu Picture Sub Menu Brightness Contrast Blacklevel Sharpness Hue (Video Only) Saturation (Video Only) Exit Operation -Adjust Brightness of the screen. -Contrast is ratio of luminance between black and white. -Adjust distinction. -Adjust black le\^l. -Adjust Sharpness of pictures. -Adjust between green tone and purple tone. -Adjust color intensity. -Go back to main menu. Page 2 OSD Quick Reference Sub Menu Operation Temperature -Choice of Warm, Normal, Cool and user's option is chosen, RGB can be adjusted. -User: fib\e to adjust the color byoontrolling Red, Green, and Blue. -Warm : Red-tinged screen. -Normal : Green-tinged screen. -Cool : blue-tinged screen. Auto Color (A-RGB Only) Color automatically set from strange input signal. Exit -Go back to tVrain tVenu. Page 3