i3 International Ax46DC Manuals

Connect the PoE or DC12V power connector. PoE (IEEE 802.3af): Connect the RJ-45 connector to a PoE compatible network device that supplied power through the Ethernet cable. DC12V: Connect the DC12V power connector to a DC12V power source. SAFETY When installing your Ax46/66 camera be sure to avoid: • excessive heat, such as direct sunlight or heating appliances • contaminants such as dust and smoke • strong magnetic fields • sources of powerful electromagnetic radiation such as radios or TV transmitters • moisture and humidity • areas with mechanical vibrations • fluorescent lamps or objects that reflect light • unstable light sources as this may cause flickering • temperatures below -10° Celsius or 14° Fahrenheit and above 50° Celsius or 122° Fahrenheit • For more details on installation and operation, please refer to the CD provided. POWER SUPPLY Ensure the supplied voltage meets the power consumption requirements of this camera before powering the camera on. Incorrect voltage may cause irreparable damage to the video camera and will effectively void the camera warranty. PoE power is supported by this camera series.To mount the camera, do the following: CLEANING • For maximum optical clarity, the camera dome or lens must remain clean. Use a soft, dry cloth to remove finger prints or dust from the dome cover. • Use a blower to remove dust from the lens. • Clean the body with a soft, dry cloth. If it is very dirty, use a cloth dampened with a small quantity of neutral detergent, then wipe dry. • Do not use volatile solvents such as alcohol, benzene, or thinners, as they may dam- age the surface finishes. SERVICING To avoid electrical shock and to preserve the product warranty, DO NOT disasemble the camera. Refer servicing to qualified personnel only. PACKAGE CONTENTS 1. User Manual CD x1 2. Guide Pattern sticker x1 3. Torx key x1 4. Plastic Anchor x3 5. Round Head Screw (Tapping Type) x3 CAMERA PARTS AND DEFINITIONS Quick Start Guide Network IR Door Counting Dome Camera Ax46DC i3-TRNG-CAMS-Ax46DC-QuickGuide.indd Rev. 151204 WARNING! DO NOT connect both PoE and DC12V power connectors at the same time. For DC power supply use, make sure the polarity is correct to avoid malfunction and / or camera damage. 1 User Guide IP Finder 2 5 4 3 Ceiling Mounting Hole Hole Hole Hole Mounting base Horizontal stand Vertical stand Lower dome Infrared lamp plate Lens Black liner Safety rope IN DC12V Cables Power line Network cable Ø111 82.4 Ø79.1 Ø100.4 Unit: mm