i3-TECHNOLOGIES i3SIXTY F43-C Manuals

i3-TECHNOLOGIES i3SIXTY Mobile Stand F43-C INSTALLATION MANUAL 20190724 IMPORTANT SAFETY WARNINGS 1. When noticing damage to the power cable, immediately disconnect the power cable from the wall outlet, and notify your i3 support contact. !!! Do not use the device with noticable damage to the power cables. 2. Only mount the i3SIXTY Display on the i3SIXTY F43-C Mobile Stand. Do not attempt to mount other devices. 3. Do not position the i3SIXTY F43-C Mobile Stand to be used on an inclining floor, not even with the wheel brakes locked. The wheel brakes are not designed for this purpose. 4. Do not stand on the laptop tray, or use the Mobile Stand for any other purpose than specified in the usage instructions. 5. During assembly, do not rotate the display without first fully finishing the instructions. Do not rotate while any screw is still unfastened. 19 philips Wrench Screw Driver 20 minutes 2 people Required: A B C D E F 4x 1 Hex Bolt M6 x 15 mm Cross/Hex head Hex Bolt M8 x 20 mm Cross/Hex head Tapered Bolt M8 x 14 mm Cross head 8x 2 2x 3 2x 4 Round Bolt M8 x 14 mm Cross head 8x 5 Round Bolt M5 x 8 mm Cross head 4x 6 Round Bolt M4 x 12 mm Cross head 4x 7 Washer M10 4x 8 Split Lock Washer M10 4x 9 Caster Wheels 4x 10 Spacer Bolts 2x 11 Cable Clips Assemble the 4 wheels to each of the 4 legs. Make sure that the brakes are locked throughout the entire assembly process. Screw in the threaded bolt into the bottom of the leg, through the wash- ers (7 and 8). Tightly fasten the wheels using a #19 wrench. Assemble the legs (A and B) and the tablet (C) together, with the M6x15 hex bolts (1). Note that the backside of the tablet is indicated with a shorter edge. Having the wheels locked will help keep the legs positioned. Thightly fasten the bolts with a wrench or cross screwdriver. C 1 B A 7 8 Mount the rotating display mount (D) to the leg assembly, with the 8x M8x20 hex bolts (2). Make sure all bolts are tightly fastened with a wrench or cross screwdriver. Feed the power cord through the center hole of the rotating part. At the front of the Mobile Stand, leave 450 mm of the power cord. Fasten the power cord with the cable clips (11) and M4x12 screws (6). D 2 6 11 450 mm 2x 5

i3-TECHNOLOGIES i3SIXTY Mobile Stand F43-C INSTALLATION MANUAL 20190716 IMPORTANT SAFETY WARNINGS 1. When noticing damage to the power cable, immediately disconnect the power cable from the wall outlet, and notify your i3 support contact. !!! Do not use the device with noticable damage to the power cables. 2. Only mount the i3SIXTY Display on the i3SIXTY F43-C Mobile Stand. Do not attempt to mount other devices. 3. Do not position the i3SIXTY F43-C Mobile Stand to be used on an inclining floor, not even with the wheel brakes locked. The wheel brakes are not designed for this purpose. 4. Do not stand on the laptop tray, or use the Mobile Stand for any other purpose than specified in the usage instructions. 5. During assembly, do not rotate the display without first fully finishing the instructions. Do not rotate while any screw is still unfastened. 19 philips Wrench Screw Driver 20 minutes 2 people Required: A B C D E F 2 1 3 4 5 6 7 8 9 4 pieces Hex Bolt M6 x 15 mm 8 pieces Hex Bolt M8 x 20 mm 2 pieces Tapered bolt M8 x 14 mm Philips head. 2 pieces Round bolt M8 x 14 mm Philips head 4 pieces Round bolt M5 x 8 mm Philips head 4 pieces Tapered bolt M5 x 10 mm Philips head 4 pieces Spacer bolt 4 pieces Caster wheels 2 pieces Cable clips Assemble the 4 wheels to each of the 4 legs. Make sure that the brakes are locked throughout the entire assembly process. Screw in the threaded bolt into the bottom of the leg. Tightly fasten the wheels using a #19 wrench. Fasten the legs to the center rotating part. Thightly fasten the bolts with a wrench. 2 D 2 B A