Ibiza LAS-159RGB Manuals

1 FFIIRREEFFLLYY LLAASSEERR 110000++5500m mW W DDM MXX RRG G ++ 33xx 33W W RR++G G++BB LLEEDDss LAS-159RGB (15-1035) GB - INSTRUCTION MANUAL Please read this instruction manual before use Please check when open the package In order to use this product safety and correctly, please read this manual carefully before using and follow this manual strictly to operate it. When you receive this product, please take it carefully and check whether it has any problem caused by transportation. And also check the parts as follows:  Firefly Laser light with LED: 1 PC  Power lead: 1PC  Instruction manual: 1 PC INSTALLATION o Please make sure the voltage you are using complies with the marking on the product before installation. o It must be installed by a specialist, fixed safely and adjusted to suitable irradiation angle. o Please make sure there isn’t any flammable and volatile object such as ornament etc. at the range of 0.5M when installing. The distance between lighting and wall must be at least 15cm o Please make sure there isn’t anything to stuff the ventilation funs and exhaust pipe. o Based on safety reason, please use the safe rope to wind the lighting at the weight of 10 times. o This products should be installed fixedly o Based on safety reason, wire to grounding is very important. NOTICE  Please follow this manual to operate strictly. Don’t open it yourself. This product should be repaired by specialist if have any problem.  Please keep this product in dry air. Don’t use it under rainy or wet or dusty conditions.  Fixed installation: Prevent this product from strong vibration or impact. Don’t use it under shaking conditions.  Prevent the other things to enter into the products to cause some problem.  Please make sure the exhaust channel is no problem  during working  Please take notice that the plug is connected to the socket fixedly before turn on the power.  Don’t turn on or off this lighting frequently because it will shorten laser using age. Try not to keep it work for so long time.  Based on semiconductor laser speciality, it needs to turn off for 15 minutes after using two hours. And then reuse until it become cooling.  Don’t use any telescope to observe laser because it will become dangerous.  Don’t touch the products and pull the power cable powerfully with wet hands.  The distance between lighting and objects is at least 1m.  There aren’t any parts for user to repair in this product. Don’t open it.  When the brightness of semiconductor laser becomes darker or other destroy, please contact the dealer immediately.  Please notice anti-quake when re-transportation. It is better to use original packing. WARNING Please make sure the power has been cut off when do any installation and repair. This lighting laser danger rating is Class III B. It is dangerous to observe in the beam of light directly. The minimum irradiated distance is 13CM and the longest irradiated time is below 10 seconds. Please make sure the distance between lighting and flammable things is at least 0.5M. MAINTENANCE Please maintain the products regularly. Using cotton stick dipped into alcohol to clean the glass to optimize light output. Don’t use wet clothes or other chemical solvent to clean glass. The cleaning frequency should be based on the operation frequency and environmental circumstances. We suggest cleaning it every 20 days. Please use clean towel to scrape the face of metal case, check and clean the exhaust channel regularly. SPECIFICATIONS Laser type: Using full solid semiconductor laser. red laser wave length 650nm and green laser wave length 532nm. Power supply: 220-250Vac∼50/60Hz Laser power: 650nm-100mW; 532nm-50mW LED color: Red + Green + Blue LED power: 3W