IBM 7036-P16 Manuals

1 pdf manual(s) IBM 7036-P16 for free download (Document Types: Manual )

IBM 7036-P16 Manual  [PDF] (12 pages)

  • Identifier: id-1801725
  • Brand: IBM
  • Device: 7036-P16 Network Hardware
  • Type: PDF
  • Key Aspects: Risk Mitigation and Accident Prevention, Troubleshooting Information, Routine Functionality Testing
  • UPD Date: 19.04.2026
  • Source File: 1738549.pdf
  • Pages: 12
  • Description: Instruction and reference manual for the IBM 7036-P16.
Pages Preview:
  • The 7036-P16 supports full-duplex operation up to 230K bps for any one port running, with the other fifteen ports running at speeds not to exceed 115K bps. Operation with all sixteen ports running full-duplex at 115K bps is supported. Network Throughput: The 7036-P16 is an Ethernet attached device and as such any number may be attached to given network. However, the user must realize that attaching more devices to any network reduces the overall network th
  • 7036-P16 Software Installation and Configuration Instructions The following tasks are covered in this section: • Install the Digi RealPort® software on the host server from the software packages on the 7036-P16 Software and Documentation CD that was provided with the product. • Configure the 7036-P16 as a device on the host server. This in effect binds the 7036-P16 to the host server. • Configure the 7036-P16 serial ports for use with the Digi RealP
  • The installation begins, do not interrupt process until the installation is complete. A successful installation returns an OK message. An unsuccessful installation returns a FAILED message. If the installation fails, study the smit.log file to determine the cause. 13. Press: F10. 14. After the RealPort® software is successfully installed, the user should configure the 7036-P16 IP address, 7036-P16 Network Configuration. Linux SuSE Installation Instruction
  • 8. The next steps perform the rpmbuild. Type: cd /usr/src/packages/SOURCES 9. Type: rpmbuild --rebuild 40002086_k.rpm 10. Type: rpm -i /usr/src/packages/RPMS/ppc64/dgrp-1.9-1.ppc64.rpm 11. Once this step concludes successfully, the RealPort® installation on Red Hat is complete. 12. After the RealPort® software is successfully installed, the user should configure the IP address, go to 7036-P16 IP address, 7036-P16 Network Configuration. 7036-P16 Network C
  • digiasync.realport.obj 3.8.0.0 Committed Digi RealPort Driver digiasync.realport.obj 3.8.0.0 Committed Digi RealPort Driver If there is any other response, then the Digi RealPort® Software is not installed and the user should go to the AIX Installation Procedure. 3. Type: smitty devices. 4. Use the cursor to select: Digi Device and Terminal Servers and press Enter. 5. Use the cursor to select: Add a Digi Device and Terminal Servers and press E
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Machine Type Model 7036-P16 LAN attached remote Asynchronous node (RAN) (FC xxxx) The 7036-P16 is a 16-Port EIA-232 LAN Attached Remote Asynchronous Node (RAN) for use with IBM® eServer™ p5 servers andIBM Systems. The RAN provides connectivity to asynchronous EIA-232 devices, such as modems, TTY terminals, printers, etc. The RAN, when used with RealPort® software from Digi-Data Corporation, will convert the serial data stream to and from attached asynchronous EIA-232 devices into Ethernet TCP/IP traffic. Once the data is on the TCP/IP network, a host system attached to the same network can treat the attached devices as if the devices were connected directly to the host system. 7036-P16 RAN attached remote asynchronous node specifications Item Description Physical Dimensions: 42.7 cm (16.8 in.) x 16.76 cm (6.6 in.) x 4.06 cm (1.6 in.) Weight: 3.2 kg (7.05 lb.) Environmental Limits Operating • Temperature: 0 to 40 C (Ambient Air Temperature) • Humidity: 5% to 95% (non-condensing) • Wet Bulb: 29 C • Altitude: 0 - 7000 ft Storage • Temperature: 1 to 60 C • Humidity: 5% to 80% (non-condensing) • Wet Bulb: 29 C Shipping • Temperature: -40 to 60 C • Humidity: 5% to 100% (non-condensing) • Wet Bulb: 29 C Power Consumption Table Voltage Current (amperes) Wattage Input • 100 - 250VAC nominal • 90 - 264VAC maximum • 47 - 63 Hz • 0.8 A Maximum • 40A in rush • 2A fuse 12 watts typical 7036-P16 throughput considerations The limits on throughput are a function of the network and the server or server partition to which the 7036-P16 ports are configured. Serial Port Throughput:

7036-P16: Related Instructions

10/100 EtherJet
IBM 10/100 EtherJet
12.04.2026 63 pages

Note Before using this information and the product it supports, be sure to read the general information under Appendix, “Notices” on page A-1. Fourth Editio Technical operations guide for the IBM 10/100 EtherJet PCI Card. It describes usage and safety, hardware instructions, repair references, troubleshooting.

DCS3860
IBM DCS3860
17.07.2026 204 pages

IBM System Storage DCS3860 Storage System Installation, User's, and Maintenance Guide SC27-5942-00 ��� Quick reference guide for the IBM DCS3860 Storage. This manual covers installation, hardware instructions, cleaning instructions.

TotalStorage DS300
IBM TotalStorage DS300
21.04.2026 680 pages

ibm.com/redbooks IBM TotalStorage DS300 and DS400 Best Practices Guide Byron Braswell Hendrik Ernst Werner Fischer SAN management options Recommended configurat Device operation guide for the IBM TotalStorage DS300 Storage. It outlines the setup and adjustment procedures, system setup, device features.

6400-D Generation II Series
IBM 6400-D Generation II Series
30.04.2026 184 pages

6400-D Generation II Series Line Matrix Printers Setup Guide Form Number S550-0376-00 Copyright IBM Corp., 2004 Complete user documentation for the IBM 6400-D Generation II Series Printer. The manual outlines technical specifications and setup, system checks, assembly reference.

6700 Series
IBM 6700 Series
17.07.2026 384 pages

User’s Manual Infoprint 6700 Series Thermal Printer Form Number G550-0449-00 Instruction and usage manual for the IBM 6700 Series Printer. This manual describes setup, usage, and usage tips, adjustment procedures, maintenance schedule, device reset instructions.

ThinkPad T40
IBM ThinkPad T40
15.05.2026 104 pages

ThinkPad® T40 Series Service and Troubleshooting Guide  User instructions for the IBM ThinkPad T40 Laptop. It provides detailed operation instructions and operational safety, interface navigation, configuration options, component replacement.

Similar Manuals in the Network Hardware Category

Nanotec
WEIGL Nanotec
15.04.2026 6 pages

Step By Step Nanotec® Setup Instruction Manual Owner’s manual for the WEIGL Nanotec Network Hardware. This reference manual outlines dimensions and layout, wiring setup, reset instructions.

P8221
Axis P8221
12.06.2026 41 pages

USER’S MANUAL AXIS P8221 Network I/O Audio Module User instruction manual for the Axis P8221 Network Card. This documentation guides on daily usage, usage procedures, supported accessories.

FortiGate-100
Fortinet FortiGate-100
08.04.2026 84 pages

www.fortinet.com FortiGate-50A/50B, FortiWiFi-50B and FortiGate-100 FortiOS 3.0 MR4 I N S T A L L G U I D E Owner’s manual for the Fortinet FortiGate-100 Network Router. The manual outlines technical specifications and device features, user settings, setup instructions.

SDS1101
Lantronix SDS1101
08.05.2026 7 pages

2020 Copyright © Lantronix is a trademark of Lantronix. All rights reserved. 900-444 Rev. C 1/20 SecureBox SDS1101 & SDS2101 Quick Start Guide SecureBox SDS11 Full user manual for the Lantronix SDS1101 Network Hardware. The documentation includes cleaning instructions, operational safety, operating conditions.