ICP DAS USA WISE-580 Series Manuals

Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected] WISE-580x Quick Start Guide 1 Quick Start Guide for WISE-580x Series June 2011, Version 1.0 Thank you for purchasing WISE-580x – the Intelligent Data Logger PAC controller for remote monitoring and control application. This Quick Start Guide will provide you with minimum information to get started with WISE-580x. It is intended for use only as a quick reference. For more detailed information and procedures, please refer to the full user manual on the CD included in this package. In addition to this guide, the package includes the following items: WISE-580x Series Module Software Utility CD 2G microSD card RS-232 cable (CA-0910) Screw Driver (1C016)  WISE-580x User Manual CD:\WISE-580x\document\User Manual\ http://ftp.icpdas.com/pub/cd/wise_cd/wise-580x/document/user manual/  WISE Website http://wise.icpdas.com/index.html  ICP DAS Website http://www.icpdas.com/ Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected] WISE-580x Quick Start Guide 2 1 -------------------------------------------- Configuring Boot Mode Make sure the “Lock“ switch placed in the “OFF” position, and the “Init’ switch placed in the “OFF” position. 2 --------------------------------------------------------------------- Connecting to PC, Network and Power The WISE-580x is equipped with an RJ-45 Ethernet port for connection to an Ethernet hub/switch and PC. You can also link directly the WISE-580x to PC with an Ethernet cable. WISE-580x +Vs + Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected] WISE-580x Quick Start Guide 3 3 ----------------------------------------------------- Installing the MiniOS7 Utility Step 1: Get the MiniOS7 Utility The MiniOS7 Utility can be obtained from companion CD or our FTP site: CD:\Tools\MiniOS7 Utility\ ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/minios7/utility/minios7_utility/ Please download version v3.2.4 or later. Step 2: Follow the prompts to complete the installation After the installation has been completed, there will be a new short-cut for MiniOS7 Utility on the desktop. 4 ------------------------------------------------------------------------- Using MiniOS7 Utility to Assign a New IP The WISE-580x is an Ethernet device, which comes with a default IP address, therefore, you must first assign a new IP address to the WISE-580x. The factory default IP settings are as follows: Item Default IP Address 192.168.255.1 Subnet Mask 255.255.0.0 Gateway 192.168.0.1 MiniOS7 Utility Ver 3.24