illumina NextSeq 550Dx Manuals

NextSeq 550Dx Instrument Reference Guide Document # 1000000009513 v00 November 2017 ILLUMINA PROPRIETARY FOR IN VITRO DIAGNOSTIC USE

NextSeq 550Dx Research Mode Instrument Reference Guide Document # 1000000041922 v01 March 2018 ILLUMINA PROPRIETARY For Research Use Only. Not for use in diagnostic procedures.

This guide provides important safety information pertaining to the installation, servicing, and operation of the Illumina® NextSeq™ 550Dx instrument. This guide includes product compliance and regulatory statements. Read this document before performing any procedures on the instrument. The country of origin and date of manufacture of the system are printed on the instrument label. Safety Considerations and Markings This section identifies potential hazards associated with installing, servicing, and operating the instrument. Do not operate or interact with the instrument in a manner that exposes you to any of these dangers. All of the hazards described herein can be avoided by following the standard operating procedures included in the NextSeq 550Dx Instrument Reference Guide (document # 1000000009513). General Safety Warnings Make sure that all personnel are trained in the correct operation of the instrument and any potential safety considerations. Follow all operating instructions when working in areas marked with this label to minimize risk to personnel or the instrument. Laser Safety Warning The NextSeq 550Dx instrument is a Class 1 laser product embedded with a Class 3B diode. Class 1 levels of radiation are not considered hazardous. All laser radiation accessible to the operator is in accordance with IEC 60825-1 accessible limits for Class 1 laser products. Electrical Safety Warnings Do not remove the outer panels from the instrument. There are no user-serviceable components inside. Operating the instrument with any of the panels removed creates potential exposure to line voltage and DC voltages. The instrument is powered by 100–240 volts AC operating at 50–60 Hz. Hazardous voltage sources are located behind the rear and left side panel, but can be accessible if other panels are removed. Some voltage is present on the instrument even when the instrument is turned off. Operate the instrument with all panels intact to avoid electrical shock. Power Specifications Type Specification Line Voltage 100–240 Volts AC @ 50/60 Hz Power Supply Rating 600 Watts, maximum Electrical Connections Connect the instrument to a grounded circuit capable of delivering at least: u 15 Amps for a 100–110 Volt power source u 10 Amps for a 220–240 Volt power source For more information, see the NextSeq 550Dx Instrument Site Prep Guide (document # 1000000009869). Protective Earth The instrument has a connection to protective earth through the enclosure. The safety ground on the power cord returns protective earth to a safe reference. The protective earth connection on the power cord must be in good working condition when using this device. Fuses The instrument contains no user-replaceable fuses. FOR IN VITRO DIAGNOSTIC USE Document # 1000000009868 v01 NextSeq 550Dx Instrument Safety and Compliance Guide