Infinite Peripherals Stimare DPP-255 Manuals

DPP–255 QUICK START GUIDE Getting Started The mobile thermal printer captures data from personal computers and other host systems through serial (RS232C), USB, or Bluetooth (MFi or SPP) connectivity. The versatile functionality built-in the printer allows you to use the data output application of your choice. 2-Inch Mobile Printer Charging Your DPP-255 Before operating the DPP-255 printer, install the Lithium Ion rechargeable battery. A a fully depleted battery, ensure the battery pack is charged for at least 4 hours. Note Ensure the input cord is connected to the AC adapter before charging the battery. To prevent electrical damage to your printer and/ or battery pack, only use the approved AC charger provided with the printer. 1. Pull the DC jack port tab backwards. 2. Insert the AC adapter into the port. 3. Introduce the AC adapter plug into an appropriate power outlet to begin charging. Note LED status during charging is displayed. Charging LED Status Battery LED indicators display the modes of operation such as connection status and charging and/or low battery conditions. Color LED Status Action Solid Red Paper is out or stopped printing. Turns green once paper is replaced. Flashes Red Printer head is over heating. Turn off printer. Solid Green Battery charging complete. Power is on. N/A Flashes Green Battery is low. Charge battery. Flashes Blue Bluetooth paired. N/A Installing a Paper Roll Before replacing the paper roll or closing the cover, ensure the mobile head is cool. The mobile head may be very hot immediately after printing. Note Touching the mobile head while hot may result in burn injuries. 1. Open the paper cover by pressing the Open button. If desired, turn the knob with your finger to set the width of the paper guide. 2. Insert the new paper roll so it unfolds from the bottom. Remove the paper core when empty. 3. After the paper is inserted, adjust the paper guide so it’s wider than the width of the paper, and then pull is out. 4. Press the Feed button until a small amount of paper appears. Note At least 12mm or more of the media should be seen above the top of the printer before closing the printer cover. 5. Use both hands to close the paper cover to ensure it is closed completely.

DPP—255 Printer User Manual 2-inch Mobile Printer

DPP-255 USER MANUAL DPP-255