Inkcups Cobalt 3000 Manuals

Cobalt 3000 - Quick Start Guide 1. 2. 3. 4. 6. 7. 8. Uncrate the unit and place it on a stable work surface. Do not plug the USB in yet. Install the software from the CD provided. Start with Lasercad Then install the 64bit USB driver Install Teamviwer 8 (we'll need that for remote training and support.) Use only version 8. Plug in the USB connections *Only use the USB cord provided. Longer USB cables may have trouble communication problems. Rev.B Call Inkcups Now for remote training once you have set up your laser 978-646-8980 5. RX-4 Exhaust Unit (optional) If you have purchased the RX-4 exhaust unit, then plug the remote on plug into the back of the laser system. You must provide powered ventilation to the laser of at least 110cfm. Either vent to the outside or provide HEPA filtration if venting inside. * Failure to properly vent the laser will void the warranty for any damage resulting . Double click on the software icon located on the desktop. If you are now logged in as someone else, you can find the program here: C:\LaserCAD\AWCPrograms\LaserCAD.exe Turn the laser on using the power switch located on the back of the unit. Import your graphic file LaserCad work area. Settings for plate depth. Sending the file to the laser.