Inscape Data PES100 Manuals

PES100 / PIP100 / PIS200 QUICK INSTALLATION GUIDE Inscape Data’s Power over Ethernet surge suppressor and injector is purpose built to protect Ethernet enabled electronics and equipment from lightning and harmful transient voltages. It is designed with low impedance and insertion loss to minimize data packet loss and information integrity as it travels across the lines. Polymer data line protection allows data transmission speeds up to 100 MBPS. Caution: Powering two devices with dissimilar voltage with PIS200 may damage the interconnected device. Please take caution to ensure voltage compatibility. For example, it is not recommended to use one 12VDC PoE device and one 48VDC PoE device. Caution: Surge protection effectiveness is directly related to the quality of the grounding point. Not securing the grounding point to an appropriate ground will leave the device unprotected. Package Contents • PES100 / PIP100 / PIS200 • Ground Wire • Installation Guide / Warranty PES100 (See Figure 1) This is an Ethernet In-Line Surge Suppressor with support up to 48VDC PoE Protection. Data and power are both protected by the PES100. Connect the RJ45 accordingly then secure the ground wire to an appropriate grounding point. PIP100 (See Figure 1) This is a one port Power over Ethernet Injector with voltage support up to 48VDC. The port labeled “ODU” provides power and “RJ45” provide data connectivity. Connect the RJ45 jacks accordingly then secure the ground wire to an appropriate grounding point. PIS200 (See Figure 2) This is a two port Power over Ethernet Injector with Voltage support up to 48VDC. It is used to power two PoE devices with the same DC PoE voltage. Data and power are both protected by the PIS200. PIP100 1-Port PoE DC Injector PIP100 & PES100 System Configuration for Outdoor Video Camera Applications Control Center Heater/Blower Camera PoE Enabled Camera Housing PCH100HB or PCH200HB or PCH300HB Network Switch Power Input 12VDC PES100 1-Port Ethernet Surge Suppressor GND GND Figure 1 PoE Enabled Camera Housing PCH100HB or PCH200HB or PCH300HB Power Input 12VDC SB54 or Other Wireless Products PIS200 System Configuration Simultaneous Surge Suppression and Power Injection to Two Devices PIS200 2-Port PoE DC Injector with Surge Suppressor GND Heater/Blower Camera Figure 2 United States Headquarters 1611 South Main Street, Milpitas, CA 95035, U.S.A. PHONE +1.408.935.8500 TOLL FREE 1.888.267.4507 FAX +1.408.935.8900 EMAIL [email protected] Asia Headquarters Inscape International Co., Ltd 9F, No 358, Jhonghe Rd., Jhonghe City, Taipei County 235, Taiwan, R.O.C. PHONE +886.2.2924.0868 FAX +886.2.2924.4385 Inscape Data Corporation