InSinkErator Hot1 Manuals

i_ S:_ii:i!!!__ i¸ '_¸____ _:i_ Owner's Manual

The Installation, Care and Use of Your New “Hot-1” Hot Water Dispenser ®Warnings alert you to hazards or unsafe practices which could result in severe personal injury or death. Cautions alert you to hazards or unsafe practices which could result in minor personal injury or product/property damage. Please be certain that the person who installs or uses this appliance carefully reads and understands the Safety Instructions contained in this manual. This appliance pro- duces extremely hot water. Do not allow children to operate this appliance. Safety Instructions Important Do not install this appliance in public areas where there is unsupervised access to this appliance. Capacity 1/3 gallon (1.3L), up to 40 cups of 190°F*(88°C) water per hour. Electrical 115 volts A.C., 4.3 amps, 500 watts. Energy consumption .95 KWH/day. Three-wire cord & plug provided. Valve Self-closing Thermostat Snap-action adjustable, factory preset at approximately 190°F (88°C). Construction Copper tank and valve. Copper tubing. Shipping weight 4 lbs. (1.8 kg.) Specifications How your hot water dispenser works Water is electrically heated to a brew- ing/cooking hot 190°F (88° C)* by a compact tank that mounts under the sink. A thermostat maintains it at this approximate temperature. When you push the valve lever, cold water enters the bottom of the tank and forces hot water out of the faucet. The system is vented so the tank is not pressurized. *approximate Valve lever design may vary P/N42898 04/03

Instant Hot Water Dispenser Owner’s Manual Installation, Care & Use Instalacion, cuidado & uso Installation, soin et utilisation Model Hot1