INSTEON 2441ZTH Manuals

Page 1 of 24 Rev: 8/30/2012 11:41 AM INSTEON® Wireless Thermostat Owner Manual (#2441ZTH)

2441ZTH Rev. 7/18/2012 9:57 AM / See Owner’s Manual for Warranty Information. Protected under U.S. and foreign patents (see www.insteon.com) © Copyright 2012 INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 800-762-7845 Quick Start Guide INSTEON® Wireless Thermostat Model: 2441ZTH About INSTEON Wireless Thermostat INSTEON Wireless Thermostat is a wireless, battery-operated, one- day programmable, INSTEON-compatible thermostat. INSTEON Wireless Thermostat includes a humidity sensor and the ability to communicate via RF to other INSTEON devices and thermostats. INSTEON Wireless Thermostat does not connect directly to the HVAC (Heating, Ventilating and Air Conditioning) system. If you want to control the HVAC system you need to install INSTEON Thermostat and connect it directly to the HVAC system. INSTEON Wireless Thermostat may be used as a standalone INSTEON controller capable of controlling other INSTEON responders. On its own, INSTEON Wireless Thermostat sends out notifications based on temperature status and can even control standalone heaters and fans plugged into ApplianceLinc modules (#2456S3). INSTEON Wireless Thermostats can also be linked to your main INSTEON Thermostat controller to create extra temperature zones in your home. INSTEON Thermostat displays the temperature readouts from up to two linked INSTEON Wireless Thermostats on its display. Preparation Proper installation of INSTEON Wireless Thermostat will be accomplished by following these steps. The product will mainly be used in a tabletop stand; wall mounting is optional. 1) Make sure the location that you have selected for INSTEON Wireless Thermostat will not be affected by daily movement of sunlight or is not in direct line of sight of a nearby HVAC vent or fan 2) Insert 2 AA batteries into INSTEON Wireless Thermostat 3) Close the cover on INSTEON Wireless Thermostat - After a few seconds INSTEON Wireless Thermostat will display ambient temperature and humidity - Mode will default to OFF - Battery segment should show full with fresh batteries - Time will show default (12:00 PM) and become active 4) Snap INSTEON Wireless Thermostat into the supplied tabletop stand or mount safely on a wall Test Operation INSTEON Wireless Thermostat communicates via radio frequency (RF) to the INSTEON Thermostat that controls the HVAC system. Before adding INSTEON Wireless Thermostat as a controller of INSTEON Thermostat, perform the following tests to familiarize yourself with INSTEON Wireless Thermostat. Keep in mind that INSTEON Wireless Thermostat is presently a standalone device and you are not yet sending any INSTEON communications. Note: While testing, the display will change but no HVAC operations will take place. INSTEON Wireless Thermostat defaults to a 5-minute delay between modes and cycles. Heating Mode Test 1) Press Mode button once to enter Heat mode 2) Tap Up or Down arrow button several times until setpoint is 1° above ambient INSTEON Wireless Thermostat will call for Heat “Heat” segment will change to “Heating,” blink for 3 seconds and then go steady No furnace activity will take place at this time--only display changes 3) Tap Up or Down arrow button until you reach a desirable heat temperature setpoint below ambient

INSTEON Wireless Thermostat 2441ZTH Quick Start Guide

2441ZTH,2732-432, 2732-532 Rev. 11/6/2012 3:09 PM / See Owner’s Manual for Warranty Information. Protected under U.S. and foreign patents (see www.insteon.com) © Copyright 2012 INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 866-243-8022 Quick Start Guide INSTEON® Wireless Thermostat Models: 2441ZTH, 2732-432, 2732-532 About INSTEON Wireless Thermostat INSTEON Wireless Thermostat is a wireless, battery-operated, one-day programmable, INSTEON-compatible thermostat. INSTEON Wireless Thermostat includes a humidity sensor and the ability to communicate via RF to other INSTEON devices and thermostats. INSTEON Wireless Thermostat does not connect directly to the HVAC (Heating, Ventilating and Air Conditioning) system. If you want to control the HVAC system you need to install INSTEON Thermostat and connect it directly to the HVAC system. INSTEON Wireless Thermostat may be used as a standalone INSTEON controller capable of controlling other INSTEON responders. On its own, INSTEON Wireless Thermostat sends out notifications based on temperature status and can even control standalone heaters and fans plugged into INSTEON On/Off modules. INSTEON Wireless Thermostats can also be linked to your main INSTEON Thermostat controller to create extra temperature zones in your home. INSTEON Thermostat displays the temperature readouts from up to two linked INSTEON Wireless Thermostats on its display. Preparation Proper installation of INSTEON Wireless Thermostat will be accomplished by following these steps. The product will mainly be used in a tabletop stand; wall mounting is optional. 1) Make sure the location that you have selected for INSTEON Wireless Thermostat will not be affected by daily movement of sunlight or is not in direct line of sight of a nearby HVAC vent or fan. 2) Insert 2 AA batteries into INSTEON Wireless Thermostat. 3) Close the cover on INSTEON Wireless Thermostat. - After a few seconds INSTEON Wireless Thermostat will display ambient temperature and humidity. - Mode will default to OFF. - Battery segment should show full with fresh batteries. - Time will show default (12:00 PM) and become active. 4) Snap INSTEON Wireless Thermostat into the supplied tabletop stand or mount safely on a wall. Adding an INSTEON Wireless Thermostat to INSTEON Thermostat Link INSTEON Wireless Thermostat to INSTEON Thermostat to provide a portable thermostat wherever you want temperature control. You can add up to two INSTEON Wireless Thermostats to an INSTEON Thermostat. 1) Press and hold INSTEON Wireless Thermostat Set button. INSTEON Wireless Thermostat Set LED will blink green and unit will beep. 2) Press and hold INSTEON Thermostat Set button. INSTEON Thermostat will beep, then double-beep. INSTEON Wireless Thermostat will double-beep. 3) Test the scene by pressing and holding INSTEON Wireless Thermostat’s Master button.

Page 1 of 27 Rev: 4/19/2013 10:47 AM INSTEON® Wireless Thermostat Owner’s Manual 2732-232, 2441ZTH (US) 2732-432 (EU) 2732-532 (AUS/NZ)