Intellinet 524490 Manuals

Wireless 300N 4-Port Router quick install guide Model 524490 INT-524490-QIG-ML1-1208-04-0 English Deutsch Español FRANçAIS POLSKI italiano 2 ENGLISH Wireless 300N 4-Port Router • Quick Install Guide English Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™ Wireless 300N 4-Port Router, Model 524490. This guide presents the basic steps to set up and operate this device. For detailed instructions and specifications, refer to the user manual on the CD enclosed with this product or at www.intellinet-network.com. Installation 1. Connect your DSL or cable modem to the WAN port of the router using the provided RJ45 Ethernet cable. NOTE: Standard modems provided by Internet service providers come with at least one LAN/Ethernet port, which connects to the WAN port of the router. 2. Connect all your computers and network devices (network-enabled components like game consoles, network media players, network storage units or LAN switches) to the LAN ports (1-4) of the router. 3. Connect the A/C power adapter to the wall socket, and then connect it to the power jack of the router. 4. Check all LEDs on the front panel. The PWR LED should be on, and the WAN and LAN LEDs should be on if the computer or network device connected to the corresponding router port(s) is powered on and correctly connected. 5. Connect your computer to one of the LAN ports of the router, then activate the network connection. Start your Web browser and open http://192.168.2.1 to display a login window. 6. Enter “admin” as the username and “1234” as the password. 2 1 3 DEUTSCH 3 Wireless 300N 4-Port Router • Kurzanleitung Deutsch Vielen Dank für den Kauf des INTELLINET NETWORK SOLUTIONS™ Wireless 300N 4-Port Router, Modell 524490. Diese Kurzanleitung zeigt die grundlegenden Schritte zur Einrichtung und Inbetriebnahme dieses Geräts. Für genauere Anweisungen nutzen Sie bitte das beiliegende Handbuch auf CD oder auf www.intellinet-network.com. Installation 1. Schließen Sie Ihr DSL- oder Kabel-Modem mit dem beiliegenden RJ45-Kabel an den WAN-Port des Routers an. HINWEIS: Standardmodems von Internetprovidern enthalten mindestens einen LAN/Ethernet-Port, der mit dem WAN-Port des Routers verbunden wird. 2. Schließen Sie alle Computer und Netzwerkgeräte (netzwerkfähige Komponenten wie Netzwerk-Mediaplayer, Netzwerkspeichergeräte oder LAN-Switche) an die LAN-Ports (1-4) des Routers an. 3. Schließen Sie das Netzteil an eine Steckdose an und verbinden Sie es dann mit der Strombuchse des Routers. 4. Überprüfen Sie alle LEDs auf der Vorderseite. Die LED “PWR” sollte leuchten, die “WAN”- und “LAN”-LEDs sollten leuchten, wenn Computer oder Netzwerkgeräte korrekt an ihren entsprechenden Router-Port(s) sowie an die Stromversorgung angeschlossen sind. 5. Ist Ihr Computer korrekt angeschlossen, können Sie die Netzwerkverbindung herstellen. Öffnen Sie Ihren Internetbrowser und geben Sie in der Adressezeile ein: “http://192.168.2.1”. Ein Login-Fenster öffnet sich. 6. Geben Sie als Benutzernamen “admin” und als Passwort “1234” ein. 2 1 3

Wireless 300N 4-Port Router USER MANUAL Model 524490 INT-524490-UM-1208-3 Federal Communications Commission Interference Statement FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio technician for help. FCC Caution This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and person's body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. Federal Communication Commissions (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.