Intergraph InterServe 9000 Manuals

DHA031531, 09/99 InterServe 9000 Late-Breaking News Hardware Mouse If your system was delivered with a three-button Primax mouse, you may see a message that says “MouseWare has detected a new Wheel Mouse....” and asks if you want to configure the new device. If this happens, select No. If you experience any other anomalies while using the Primax mouse, reinstall the mouse driver found on the Windows NT software CD-ROM. If your system was delivered with a Logitech wheel mouse, you can find information on using it by right-clicking the mouse icon in the taskbar tray, or by going to Start/Settings/Control Panel/Mouse and clicking Help in the toolbar. If the wheel on the mouse does not function, or if you experience any other anomalies while using the wheel mouse, install the LMOUSE driver software from the Intergraph System CD using InterSite Version Manager. Mylex AcceleRAID 250 and Adaptec SCSI Controllers If your system uses the Mylex AcceleRAID 250 RAID controller and an Adaptec 2940UW controller, or other Adaptec controllers that include a BIOS, you may get an error message during system startup that there is not enough free space for the Adaptec controller expansion ROM. If this occurs, you should disable the expansion ROM for the RAID controller which is not connected to the system boot device. To disable the Adaptec Expansion ROM: 1. Start the system, and when prompted to configure the Adaptec controller, press CTRL + A. 2. Select “Configure/View Host Adapter Settings” and press ENTER. 3. Select “Advanced Configuration Options” and press ENTER. 4. Select “Host Adapter BIOS (Configuration Utility Reserves BIOS Space)” and press ENTER. 5. Press ESC until prompted to save the changes. 6. Save the changes and press ESC to exit from the BIOS. The system will restart. To disable the Mylex Expansion ROM: 1. Start the system, and when prompted to configure the Mylex controller, press ALT + M. 2. At the first screen, select “BIOS Enabled” and press ENTER. 3. Press any key to save the change and exit from the BIOS. The system will restart.

InterServe 9000 System Reference September 1998 DHA031300

InterServe 9000 System Setup October 1998 DHA031200