Interlogix IFS ANT-PNL-9DB-2G Manuals

P/N 1073060 • REV A • 16OCT15 1 IFS ANT-PNL-9DB-2G Quick Start Guide Content Package Contents 1 Installation Steps 1 Specifications 1 Contact information 2 This is the IFS ANT- PNL-9DB-2G Quick Start Guide. This document provides basic instructions for installing and using the IFS ANT- PNL-9DB-2G. Package Contents Thank you for purchasing the IFS ANT- PNL-9DB-2G. Open the box of the IFS ANT- PNL-9DB-2G and carefully unpack it. The box should contain the following items: • ANT- PNL-9DB-2G x 1 • Screw Package x 1 If any item is found missing or damaged, please contact your local reseller for replacement. Installation Steps Specifications OUTDOOR INSTALLATION WARNING IMPORTANT SAFETY PRECAUTIONS: LIVES MAY BE AT RISK! Carefully observe these instructions and any special instructions that are included with the equipment you are installing. CONTACTING POWER LINES CAN BE LETHAL Make sure no power lines are anywhere where possible contact can be made. Avoid contact with antennas, masts, towers, guy wires or cables that may lean or fall. You may be injured or killed if you are touching or holding any part of equipment that comes in contacts with electrical lines. Make sure that equipment or personnel must not come in contact directly or indirectly with power lines. Assuming all overhead lines are power lines: The horizontal distance from a tower, mast or antenna to the nearest power line should be at least twice the total length of the mast/antenna combination. This will ensure that the mast will not contact power if it falls either during installation or later. TO AVOID FALLING, USE SAFE PROCEDURES WHEN WORKING AT HEIGHTS ABOVE GROUND Select equipment locations that will allow safe, simple equipment installation. • Frequency: 2400~2500 MHz • Max gain: 9dBi • Connector: N female • Max input power: 10W Max • Wave impedance: 50 OHMS ±5Ω • Dimensions: 107*90*30mm • Weight: 0.28 kg • For Image/Data/Voice communications and Wireless LAN system.