inVue L410 Manuals

Move the inner panel out to have access to the hidden edge of the inner glass panel. L410 Lock PL801 3 4 Slide strike plate over the edge of inner panel. Tighten screw. 2 Open the outer panel fully. 1 Fully close both glass panels and identify the inner glass panel. 7 Slide lock housing completely onto strike plate. Confirm lock housing is pushed against edge of outer panel. 6 Seperate outer cover from lock housing. Outer Cover Lock Housing 5 Fully close both glass panels. Hidden Edge Hidden Edge Inner Panel Hidden Edge 9 Press outer cover against outer glass panel to hold in place and pull adhesive tab. Press and hold adhesive against outer glass panel for 10 seconds. © 2016 InVue Security Products Inc. All rights reserved. InVue is a registered trademark of InVue Security Products. SD0383 Rev2 01/04/2017 www.invue.com NA / LATAM // 704.752.6513 • 888.55.INVUE EMEA // +31.23.8900150 APAC // +852.3127.6811 8 Slide outer cover onto lock housing until it rests against the surface of the outer glass panel. 2 Within 3 seconds after key beep, open the outer glass panel using the L410 outer cover as a handle. 3 To lock the L410 slide the glass panels closed. The L410 will self latch into the locked position. To unlock the L410 press IR2 or IR3 key into IR lens on front of lock housing and press the button. Wait for the IR2 or IR3 key to beep before removing key from IR lens. 1 Use: Note: If the key does not beep and makes a knack-knack sound it means the key was pulled away too soon. Try again and wait for the beep before pulling key away. 10 Use screw driver provided to tighten set screw on outer cover. Do not over tighten.