ipf electronic OT05E244 Manuals

MANUAL • Subject to alteration! Version: July 2019 ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │ [email protected] • www.ipf-electronic.com 1 OT05E244 optical sensors energetic diffuse reflection sensors (intensity differentiation) I stainless steel housing I high degree of protection IP67 I status LED for switching output and functional reserve I connection via M8-connector TECHNICAL DATA sensing range max. 35mm (object with 90% reflectivity) operating range 0 … 30mm (object with 90% reflectivity) transmitting element LED, IR light wave length 880nm operating voltage UB 10 … 30V DC residual ripple ≤ 10% power consumption (w/o load) ≤ 12mA output signal pnp, no output current (max. load) ≤ 100mA voltage drop (max. load) ≤ 2V DC sampling frequency ≤ 1kHz status LED (functional reserve) LED green status LED (switching state) LED yellow short-circuit protection + reverse polarity protection + housing material stainless steel 1.4301 optics material PBT / PMMA degree of protection (EN 60529) IP 67 dimensions M5 x 0.5 length (thread / complete) 30mm / 35.75mm operating temperature -20 … +65°C connection 2m PUR-cable mounting accessories AY000115 connection dimensional drawing colors: BN (brown), BU (blue), BK (black) functions: BN = L+, BU = L-, BK = PNP NO subminiature devices infrared light MANUAL • Subject to alteration! Version: July 2019 ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │ [email protected] • www.ipf-electronic.com 2 Installation and environment Two nuts are included to attach the device. The maximum tightening torque of 1Nm must not be exceeded! Coverings on the optics impair the function. Please install the device in such a way that dust cannot be deposited or liquids can get on the optics. The device should be accessible for cleaning. From time to time, the optics should be cleaned with a soft cloth moistened with soapy water. Cable The connecting cable between sensor and M8-connector should be laid as fixed as possible or strain-relieved. Adjustment Mount the device by taking into account the sensing range, so that the object is reliably detected. In case of reliable detection, the LED lights up green. If the LED lights up yellow, the device is in an insecure area. The cause may be an object that is too far away or even soiling. There should be no other objects than the one to be detected within the detection area or its border. Note The devices respond to the intensity of the light that is reflected of any object. The nominal switching distances are based on white paper with an area of 100 x 100mm. The possible detection ranges for less reflective materials can be found in the table "sensing range". The switching distance increases with more reflective materials (e.g. polished aluminum). Sensing range Light spot size Target (Reflectivity) Operating range Sensing range max. White (90%) 0 … 30mm 0 … 35mm Gray (18%) 0.2 … 11mm 0.2 … 13mm Black (6%) 0.3 … 6mm 0.2 … 7mm SAFETY WARNINGS: Before initial operation, please make sure to follow all safety instructions that may be provided in the product information! Never use these articles in applications where the safety of a person depends on their functionality.