ISHIDA IWQ Series Manuals

IWQ Series Service Manual First Edition Manual No. 0153A „ Read this manual thoroughly and do not perform installation, operation, maintenance, or inspection unless you fully understand all contents. „ Keep this manual in a safe place where you can refer to it easily while installing, operating, and carrying out maintenance or inspections. Warning This manual is for use by service personnel of our company or qualified to perform maintenance services for this machine. 1/54 IWQ Series Service Manual OUTLINE • Purpose of this manual This manual is used for reference at installation, placement or maintenance servicing of IWQ-150 or IWQ- 30. • Symbols in the description 1. Warning symbols Symbol Meaning Danger Indicates information that, if not avoided, is likely to result in loss of life or serious injury. (The word is used for an urgency most likely to result in loss of life or serious injury if the instruction is not heeded. The symbol is limited to extremely dangerous situations.) Warning Indicates information that, if not avoided, may result in loss of life or serious injury. (The word is used for a potentially dangerous situation possibly resulting in loss of life or serious injury if the instruction is not heeded.) Caution Indicates information that, if not avoided, could result in relatively serious or minor injury, damage to the machine or faulty operation. (The word is used for a situation possibly resulting in relatively serious or minor injuries, damage to the machine or faulty operation, if the instruction is not heeded.) 2. Explanatory symbols Symbol Meaning Note Indicates information to call or emphasize for attention to the note. Reference Reference Indicates the page to refer to. Information Information Indicates information to help understanding. • Readers of this manual This manual is edited for servicing personnel. Use by other personnel is not permitted. • This manual may be revised in accordance with modification when made in the machine. • All rights are reserved. Copying any part of this manual is prohibited without our permission. 2/54 IWQ Series Service Manual Contents Chapter 1. Product Overview .........................................................................................4 1.1 Product Overview...............................................................................................................4 1.2 Standard Specifications .....................................................................................................4 1.3 Appearance........................................................................................................................5 1.4 Appearance of Operation Panel.........................................................................................5 Chapter 2. Installation, Placement and Setup...............................................................7 2.1 Outer Dimensions ..............................................................................................................7 2.2 Procedures of Installation and Placement..........................................................................8 Chapter 3. Each Setting Mode......................................................................................10 3.1 Configuration of Modes....................................................................................................10 3.2 Setup Mode......................................................................................................................11 3.2.1 Setup mode list ..................................................................................................................11 3.2.2 Start-up of Setup Mode, setup, and end of setup..............................................................14 3.2.3 Input command format.......................................................................................................15 3.2.4 Output format.....................................................................................................................18 3.3 Test Mode ........................................................................................................................22 3.3.1 Start-up and end of Test Mode..........................................................................................22 3.3.2 C1 Mode ⋅⋅ Country No. Scale No. and Span Adjustment.................................................23 3.3.3 C2 Mode ⋅⋅⋅⋅ Key check ......................................................................................................26 3.3.4 C3 Mode ⋅⋅⋅⋅ Display check (1)...........................................................................................27 3.3.5 C4 Mode ⋅⋅⋅⋅ Display check (2)...........................................................................................27 3.3.6 C5 Mode ⋅⋅⋅⋅ Program No. display.....................................................................................28 3.3.7 C6 Mode ⋅⋅⋅⋅ E2ROM initialization (Registration ⋅ set data/all)...........................................28 3.3.8 C7 Mode ⋅⋅⋅⋅ Individual setup of country specifications and weighing conditions ..............29 3.3.9 C8 Mode ⋅⋅⋅ E2ROM data readout .....................................................................................29 3.3.10 C9 Mode A/D flickering check, I/F inspection mode..........................................................30 3.4 Country No. List ...............................................................................................................31 3.5 Scale No. List...................................................................................................................32 3.6 EEPROM Map..................................................................................................................33 3.6.1 EEPROM (0 ∼ 127) data format.........................................................................................33 3.6.2 Measurement conditions setup table.................................................................................35