Ithaca 9700 Manuals

Batch Printing Batch printing is an optional feature that allows a pre-determined list of items to be brought up at once by selecting the item category button BATCH PRINT. Once selected, the user can alter the numbers of each label printed using the arrow keys. Without administrator privileges, all that can be done is alter the numbers and print – with a password the name and details of a batch can be altered on this screen. For more information, see the main 9700 manual. Batch Printing Touch Screen Calibration To calibrate the touch screen, turn on the power while touching the screen. A red box appears, with a small black dot in the middle. Calibrate the screen by touching in the center of each red box that appears (3 times). The Terminal powers up normally after the calibration is completed. CAUTION: Be careful to not have a finger on the screen while starting the machine unless you wish to calibrate. 1.877.7ithaca (1.877.748.4222) Food Safety Terminal Quick Start Guide PN: 100-12043 REV E

Ithaca 9700 Setup Instructions 100-12189 Rev B Pg 1 of 1 Thank you for ordering the Ithaca 9700 food prep labeler. The following steps explain how to install/update the menu on the 9700. The procedure is the same for a BRAND NEW (or factory repaired) 9700 OR an existing unit needing an update for new products. Before you can begin loading the menu, you will need a USB flash drive. Use the directions below to get the menu file, MenuData.xml. Via AccessMcD Via the ISP  Go to accessmcd.com using Internet Explorer.  Select Restaurant Operations, then US Operations.  Click NABIT (Ignore the drop down list, simply click on NABIT to get to the home page).  Under Additional Resources, scroll to the bottom of the page.  Click on Food Fresh Labeling System.  Under Ithaca Model 9700, click on “product file” and choose open (allow any warnings that appear).  Click to highlight the MenuData.xml file.  Click Extract All. (Top menu or Left menu.)  Click Browse, and select the USB drive (under My Computer (XP and older) or under Computer (Vista/7/8)).  Click Extract button.  Log on to the ISP.  Double-click on the InfoCenter icon on the desktop.  Select Content Center.  Select Guides & Tools.  Find the Transact Food Freshness .xml file.  Click on View.  Click to highlight the MenuData.xml file.  Click Extract All (Top menu or Left menu.)  Click Browse, and select the USB drive (under My Computer (XP and older) or under Computer (Vista/7/8)).  Click Extract button. ** Note: The MenuData.xml file, not the original .zip file, should be placed in the root directory of the USB stick, not in a folder.** Step 1: Plug the power cable into the 9700 and an appropriate wall connector. Step 2: Turn the 9700 ON (power switch located on left side of unit, screen facing you). Step 3: Load the 9700 with appropriate label stock:  Open cover of 9700 by grabbing the sides of the touchscreen and rotating the screen UP  Place label in LEFT paper bucket (labels facing UP)  Open LEFT printing mechanism by sliding blue plastic latch to the left  Place labels under sensor ‘arm’ with one or two labels sticking out beyond the sensor  Close the screen and faceplate Step 4: Set the date and time according to your location:  Press the SETUP button (white button, bottom right of screen)  Login password: bigmac1 (press DONE)  Press SET DATE AND TIME  Use UP/DOWN arrow keys to set date and time  Press BACK button (date and time automatically saved) Step 5: Locate the USB slot on the right side of the 9700 (slide interface door open). Step 6: Insert the USB drive into the connector; make sure to observe the correct orientation of the connector (white blocks in small windows facing you). Step 7: Press the Save/Load Update/Backup button on the lower left side of screen. Step 8: Press the LOAD DATA FILE button and you will be presented with a window labeled LOAD MENU FROM USB DRIVE. Step 9: Press the LOAD button, Press OK on the next screen. Step 10: Wait for the menu to be loaded. When complete, the screen will present a window stating the Menu has been updated! It is now safe to turn off your 9700! Step 11: Remove the USB drive from the printer. Step 12: Turn the Power switch OFF, turn the power switch back ON.  The updates will NOT be ready until the 9700 is turned OFF, then ON. This is a REQUIRED step to complete the process! Contact us at (877) 748-4222 or email us at [email protected] For more information, please go to the link below: http://www.transact-tech.com/Food-Safety/Ithaca-9700