Document Preview & Text Transcription
DOCKING STATION for iPod
OWNER’S
MANUAL
JiSS-20
(iPod Not Included)
PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING
THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
DEAR JENSEN CUSTOMER
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of
your musical enjoyment. Now it’s time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion and, most importantly, without affecting your sensitive
hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes
of sound. So what sounds “normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
! Start your volume control at a low setting.
! Slowly increase the sound until you can hear it comfortably and clearly and without
distortion.
Once you have established a comfortable sound level:
! Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For a Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise.
Customer’s Record:
The serial number of this product is found on the unit. You should note the serial number of
this unit in the space provided as a permanent record of your purchase to aid in
identification in the event of theft of loss.
Model Number: JiSS-20 Serial Number:
1
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your
personal safety. However, improper use can result in potential electrical shock or fire hazards. Please
read all safety and operating instructions carefully before installation and use, and keep these
instructions handy for future reference. Take special note of all warnings listed in these instructions
and on the unit.
1.
Water and Moisture
The unit should not be used near water. For example: near a bathtub, washbowl,kitchen sink, laundry
tub, swimming pool or in a set basement.
2.
Ventilation
The unit should be situated so that its location or position does not interfere with its proper ventilation.
For example, it should not be situated on a bed, sofa, rug or similar surface that may block the
ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or
cabinet, which may impede the flow of air through the ventilation openings.
3.
Heat
The unit should be situated away from heat sources such as radiators, heat registers, stoves or other
appliances (including amplifiers) that produce heat.
4.
Power Source
The unit should be connected to a power supply only of the type described in the operating
instructions or as marked on the appliance.
5.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them. It is always best to have a clear area from where the cord exits the unit to
where it is plugged into an AC outlet.
6.
Cleaning
The unit should be cleaned only as recommended. See the section “Care and Maintenance” of this
manual for cleaning instructions.
7.
Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents
located on the product.
8.
Attachments
Do not use attachments no recommended by the product manufacturer.
9.
Lightning and Power Surge Protection
Unplug the unit from the wall outlet and disconnect the periods of time. This will prevent damage to the
product due to lightning and power-line surges.
10. Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in
a risk of fire of electric shock.
11. Damage Requiring Service
This unit should be serviced by qualified service personnel when:
A.
The power supply cord or plug has been damaged.
B.
Objects have fallen into or liquid has been spilled into the enclosure.
C.
he unit has been exposed to rain.
D.
The unit has been dropped or the enclosure damaged.
E.
The unit exhibits a marked change in performance or does not operate normally.
12. Antenna
Do not connect an external antenna to the unit (other than that provided).
13. Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a month or longer, the power cord
should be unplugged from the unit to prevent damage or corrosion.
14. Servicing
The user should not attempt to service the unit beyond those methods described in the user’s
operating instructions. Service methods not covered in the operating instructions should be referred
to qualified service personnel.
2
