Johannus classic 350 Manuals

JOHANNUS Classic 350 Quick Reference Guide INSTALLATION MUSIC DESK - Turn the supplied screws countersunk into the music desk slat by hand, till the screws stick out 2mm. - Place the music desk in the right position, with the screw points into the predrilled holes. - Firmly tighten the screws with a screwdriver, until the music desk is securely fastened. The use of an electric screwdriver is not recommended. OVERVIEW OF CONTROLS SWITCH ON Switch on the organ with the on/off piston at the right, next to the manuals. Wait several seconds. Starting the control functions and the settings will take some time. The lights of the 0 piston and the as standard set functions lit up. The settings appear on the display. ACCESSORIES Chorus (CH): Chorus is a function for lightly detuning the organ stops to give it a broader and livelier sound. Reeds Off (RO): Reeds Off is a function to switch off all reeds simultaneously. All Swells to Swell (S/S): All Swells to Swell transforms the swell pedal for the Swell to a swell pedal for the whole organ. If no expression pedal is configured as a swell pedal for the Swell, the S/S piston cannot be activated. Crescendo (CR): Crescendo is a piston to activate the crescendo pedal. If no expression pedal is configured as a crescendo pedal, the CR piston cannot be activated. Manual Bass (MB): The Manual Bass function couples the Pedal monophonic to the Great. Cantus Firmus (CF): The Cantus Firmus function couples the Swell monophonic to the Great. Transposer (TRANS.): The Transposer function shifts the pitch by half-tone increments (from -8 to +8). The set pitch can be read on the display (Tr:..). - Press the TRANS. piston. - Use the - and + pistons to set the pitch. - Use the ENTER piston to save the change. Recall/Cancel function (0): The 0 piston cancels registration in two ways: - A short press on the 0 piston: Only the last change is cancelled. - A long press on the 0 piston: All registrations are cancelled. Keyboard Transfer (KT): Keyboard Transfer is a function to switch the manuals of the Choir and the Great. JOHANNUS MENU (MENU) In the Johannus Menu several functions of the organ can be set: - Press the MENU piston to activate the Johannus Menu on the display. - Navigating the menu is done with the - and + pistons. - Confirmation of a choice is done with the ENTER piston. - Cancel or step back in the menu is done with the MENU piston. INTONATIONS The organ has 12 intonations divided into four styles: Romantic (ROM), Symphonic (SYM), Baroque (BAR) and Historic (HIS) and three variations per style: Standard, Solo (SOLO) and Trio (TRIO). - Select an intonation style by pressing the ROM, SYM, BAR or HIS piston - Select an intonation variation by pressing the SOLO or TRIO piston. If no variation piston is selected, Standard is selected automatically. PRE-PROGRAMMED MEMORY LOCATIONS Pre-programmed memory locations are available by operating pistons PP to T and PL. These seven memory locations have factory settings (presets) appropriate for the quiet pianissimo to the loud tutti and the classic plenum. Calling up a pre-programmed memory location: Press a pre-programmed memory location (PP-T or PL). The active stops light up. A Pedal stops B Choir stops C Great stops D Swell stops E Volume control Organ F Volume control Cathedral G Phones connection H SET I Capture memory locations J CH: Chorus K Pre-programmed memory locations L RO: Reeds Off M S/S : All swells to Swell N CR: Crescendo O MB: Manual Bass P CF: Cantus Firmus Q TRANS.: Transposer R - and + pistons S ENTER T MENU U 0: Recall / Cancel V Manual Choir W Manual Great X Manual Swell Y On/Off piston Z Display AA Four solo and orchestral voices AB Intonation styles AC Intonation variations AD KT: Keyboard Transfer