Johnson Controls LP-FXVMA Series Manuals

FXVMA Installation Instructions 1 Applications This document covers the mounting and wiring of the FXVMA Variable Air Volume (VAV) Box Controller. For more information about programming, configuring, downloading, and/or commissioning the FXVMA, refer to the FXVMA VAV Box Controller Technical Bulletin (LIT-12011249). The FXVMA is a VAV box controller in the Facility Explorer line of products. The FXVMA is an integrated assembly consisting of a high performance digital controller, fast response actuator, and an accurate Differential Pressure Transducer (DPT), all of which are pre-wired together and integrated inside a single enclosure. The FXVMA is fully programmable using FX Builder, or you can select and configure a pre-defined VAV box control application using FX Builder Express. Various software and accessories are available to assist you during the commissioning of the FXVMA and the VAV box. This includes FX CommPro, which has computer-based downloading and commissioning capabilities; and the Medium User Interface, which has an easy-to-use hardware interface. The FXVMA includes an embedded communication capability that enables the FXVMA to integrate into an N2 or BACnet® Master-Slave/Token-Passing (MS/TP) (depending on model) network of a building automation system. North American Emissions Compliance United States Canada Figure 1: FXVMA VAV Box Controller This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense. This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. FXVMA Installation Instructions LP-FXVMAxx-x Part No. 24-10143-47, Rev. D Issued April 16, 2009 Supersedes February 4, 2008