Johnson Controls WT-ROUTER Manuals

WT-ROUTER Router Installation Instructions 1 Refer to the QuickLIT website for the most up-to-date version of this document. Application The WT-ROUTER Router relays wireless transmissions from a Johnson Controls® WT-4000 Series Pneumatic-to-Direct Digital Control (DDC) Room Thermostat to other WT-ROUTER Routers or to a Johnson Controls WT-BAC-IP Gateway. Adding routers to a wireless mesh network enhances the robustness of the network by extending the wireless mesh communication range up to 750 ft (229 m). In addition, the routers provide multiple routes of communication with the gateway. The WT-ROUTER Router installs in minutes with no need to run network cables. An STS LED indicator (Figure 1) allows for strategic positioning in areas with reliable network connectivity. The router is powered by a low-voltage 5 to 30 VDC power supply. The WT-ROUTER Router is designed for indoor, intra-building applications only. The router uses direct-sequence, spread-spectrum RF technology, and operates on the 2.4 GHz Industrial, Scientific, and Medical (ISM) band. The router also meets the IEEE 802.15.4 standard for low power, low duty cycle RF transmitting systems. North American Emissions Compliance United States Canada IMPORTANT: Use the WT-ROUTER Router only to provide an input to equipment under normal operating conditions. Where failure or malfunction of the router could lead to personal injury or property damage to the controlled equipment or other property, additional precautions must be designed into the control system. Incorporate and maintain other devices, such as supervisory or alarm systems or safety or limit controls, intended to warn of or protect against failure or malfunction of the router. Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning (Part 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Industry Canada Statement The term IC before the certification/registration number only signifies that the Industry Canada technical specifications were met. Le terme « IC » précédant le numéro d'accréditation/ inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada. WT-ROUTER Router Installation Instructions WT-ROUTER Part No. 24-10732-13, Rev. B Issued August 2017 24- 10732- 13, Rev. B