Juniper EX4600 Manuals

Quick Start Guide EX4600 IN THIS GUIDE Step 1: Begin | 1 Step 2: Up and Running | 6 Step 3: Keep Going | 9 Step 1: Begin IN THIS SECTION Install the Power Supplies (If Not Already Installed) | 2 Install the Fan Modules (If Not Already Installed) | 3 Mount the EX4600 | 3 Connect Power to the EX4600 | 5 To install and perform initial configuration of a Juniper Networks EX4600 Ethernet Switch, you need: • Electrostatic discharge (ESD) grounding strap (not provided) • One pair of side mounting-rails (provided) • One pair of rear mounting-blades (provided) • Twelve screws to secure the mounting-rails and mounting-blades to the chassis (provided) • Eight screws to secure the chassis and mounting-blades to the rack (not provided) • Screwdriver appropriate for your rack-mounting screws (not provided) • Two power cords with plugs appropriate for your geographical location (provided, for all EX4600 switches except the EX4600-40F-S switch.

EX4600 series / QFX5100-24S Switch Hardware Guide Published: 2014-08-22 - draft Copyright © 2014, Juniper Networks, Inc.