Juniper SRX210 - SERVICE GATEWAY 3G EXPRESSCARD Manuals

SRX210 Services Gateway 3G ExpressCard Quick Start Use the instructions in this guide to help you install the SRX210 Services Gateway 3G ExpressCard. For details, see „ The SRX210 Services Gateway Hardware Guide at http://www.juniper.net/techpubs/a057.html „ The Junos OS documentation at http://www.juniper.net/techpubs/software/junos-srx/index.html Overview of 3G Connectivity on SRX Series Services Gateways The SRX210 Services Gateway has a built-in 3G ExpressCard slot (wireless modem card). You can use the 3G ExpressCard sold through Juniper Networks for wireless data connectivity to 3G networks. Support for the 3G ExpressCard extends the already rich set of WAN connectivity options available on the SRX210 Services Gateway. The SRX210 Services Gateway supports a wireless interface as a backup for primary interfaces such as Gigabit Ethernet and Fast Ethernet. You can also use the 3G interface as the primary interface. 3G Connectivity on GSM and CDMA Expresscards Juniper Networks supports 3G ExpressCards that you can insert into the ExpressCard slot in the SRX210 Services Gateway. When the services gateway is equipped with a 3G ExpressCard and used in a branch office, the device can provide dial-out services to PC users and forward IP traffic to the service provider’s cellular network. Juniper Networks supports the following 3G ExpressCards: „ Sierra Wireless AirCard Global System for Mobile Communications (GSM) High-Speed Downlink Packet Access (HSDPA) ExpressCard „ Sierra Wireless AirCard GSM High-Speed Uplink Packet Access (HSUPA) ExpressCard „ Sierra Wireless AirCard Code-Division Multiple Access (CDMA) 1xEvolution-Data Optimized (EV-DO) rev. A ExpressCard GSM and CDMA are competing digital cellular phone technologies. CDMA is used by the Verizon and Sprint service providers. There are several GSM technology users worldwide. NOTE: The SRX210 Services Gateway supports only certain Sierra Wireless Inc. ExpressCards, which are supplied by Juniper Networks and orderable from the Juniper Price List. For details on the models supported, see the SRX210 Services Gateway Hardware Guide. Installing the 3G ExpressCard in the SRX210 Services Gateway ExpressCard Slot Use the following instructions to install the 3G ExpressCard in the SRX210 Services Gateway. See the following illustration for details on the location of the 3G ExpressCard slot on the device’s back panel. SRX210 Services Gateway Back Panel Task 1: Before You Begin Before you begin, do the following: 1. Install your SRX210 Services Gateway and establish basic connectivity. For more information, see the SRX210 Services Gateway Hardware Guide. 2. Establish an account with a cellular network service provider. Contact your service provider for more information on creating an account. „ For CDMA/EV-DO 3G ExpressCards, use the Electronic Serial Number (ESN) available on the card to create an account with a CDMA service provider (Verizon or Sprint). To access the ESN on the 3G ExpressCard: user@host > show modem wireless interface cl-0/0/8 firmware „ For HSPA (GSM/UMTS) 3G ExpressCards, a SIM card should be obtained from the service provider and inserted into the SIM slot of the 3G ExpressCard. Task 2: Install the 3G ExpressCard To install the 3G ExpressCard on the SRX210 Services Gateway: 1. Ensure that the device is powered off. 2. Insert the 3G ExpressCard into the ExpressCard slot. Align the 3G ExpressCard as follows: „ Ensure that the 3G ExpressCard is parallel with the surface on which the services gateway is placed. „ Ensure that the center of the 3G ExpressCard is aligned with the center of the ExpressCard slot on the services gateway. Callout Description Callout Description 1 Power supply point 4 Lock for security cable 2 Cable tie holder 5 ExpressCard slot 3 Grounding point