JVC MX-DK15UN Manuals

COMPACT COMPONENT SYSTEM CA-MXDK5 MX-DK3 —Consists of CA-MXDK3, SP-MXDK3F and SP-MXDK3W MX-DK1 —Consists of CA-MXDK1 and SP-MXDK1F MX-DK15 —Consists of CA-MXDK15 and SP-MXDK15F INSTRUCTIONS GVT0177-001B [US,UN,UG,UX,A,UW] (For CA-MXDK5) (For CA-MXDK5) (For CA-MXDK5) (For CA-MXDK5) G-1 Warnings, Cautions and Others Caution–– (standby/on) button! Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus, ensure that the plug is easily accessible. The (standby/on) button in any position does not disconnect the mains line. • When the System is on standby, the STANDBY lamp lights red. • When the System is turned on, the STANDBY lamp goes off. The power can be remote controlled. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION • Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) • Do not place any naked flame sources, such as lighted candles, on the apparatus. • When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly. • Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments. G-2 Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows 1. Front: No obstructions and open spacing. 2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below. 3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more. The minimal clearance is shown as below: [European Union only] 15 cm 1 cm 1 cm 15 cm 10 cm 10 cm 15 cm Front view Side view CA-MXDK5 CA-MXDK3 CA-MXDK1 CA-MXDK15 CA-MXDK5 CA-MXDK3 CA-MXDK1 CA-MXDK15 Wall or obstructions Wall or obstructions Front No obstructions CAUTION! To avoid personal injury or accidentally dropping the unit, have two persons unpack, carry, and install the unit. 24 kg MX-DK3

SERVICE MANUAL COPYRIGHT © 2006 Victor Company of Japan, Limited No.MB515 2006/6 COMPACT COMPONENT SYSTEM MB515 2006 6 MX-DK1US,MX-DK1UW,MX-DK1UG,MX-DK1UN, MX-DK3US,MX-DK3UW,MX-DK3UG,MX-DK3UN,MX-DK15UN Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade) TABLE OF CONTENTS 1 PRECAUTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 2 SPECIFIC SERVICE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 3 DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 4 ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19 5 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21 CA-MXDK3 SP-MXDK3F SP-MXDK3F CA-MXDK1 SP-MXDK1F SP-MXDK1F CA-MXDK15 SP-MXDK15F SP-MXDK15F SP-MXDK3W 1-2 (No.MB515) SPECIFICATION Amplifier section Output Power CA-MXDK1/CA-MXDK15 90 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion. CA-MXDK3 MAIN SPEAKERS 100 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion. SUBWOOFERS 100 W per channel, min. RMS, driven into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. Digital output OPTICAL DIGITAL OUTPUT -21 dBm to -15 dBm (660 nm ±30 nm) Audio input sensitivity/ Impedance*1 AUX 400 mV/47 k Ω MIC 1/2 3.0 mV/50 k Ω VIDEO OUT Color system NTSC/PAL selectable VIDEO (composite) 1 V(p-p)/75Ω S-VIDEO Y (luminance) 1 V(p-p)/75 Ω C (chrominance, burst) 0.286 V(p-p)/75 Ω COMPONENT (Interlace/Progressive: CA-MXDK5 only) (Y) 1 V(p-p)/75 Ω (PB/PR) 0.7 V(p-p)/75 Ω Speaker Terminals 6 Ω - 16 Ω (Main speakers) 6 Ω - 16 Ω (Subwoofers) Tuner section FM tuning range 87.50 MHz - 108.00 MHz AM (MW) tuning range 531 kHz - 1 710 kHz (at 9 kHz) 530 kHz - 1 710 kHz (at 10 kHz) 531 kHz - 1 602 kHz (at 9 kHz) (For Saudi Arabia only) 530 kHz - 1 600 kHz (at 10 kHz) Disc player section Playable disc DVD Video/DVD Audio*2/CD/VCD/SVCD CD-R/-RW/-ROM (CD/VCD/SVCD/MP3/WMA/MPEG- 1/MPEG-2/ASF*2/JPEG/DivX*2 format) DVD-R/-RW (DVD Video/DVD Video Recording (VR)/ MP3/WMA/MPEG-1/MPEG-2/ASF*2/JPEG/DivX*2 for- mat) +R/+RW (DVD Video format) Dynamic range 90 dB Horizontal resolution 500 lines Wow and flutter Immeasurable Cassette deck section Frequency response Normal (type I) 50 Hz - 14 000 Hz Wow and flutter 0.15% (WRMS) General Power requirement AC 110 V / AC 127 V / AC 220 V / AC 230 V - AC 240 V , (adjustable with the voltage selector), 50 Hz / 60 Hz Power consumption at operation 160 W (CA-MXDK3) 95 W (CA-MXDK1/ CA-MXDK15) on standby 20 W (CA-MXDK3) 17 W (CA-MXDK1/ CA-MXDK15) Dimensions (approx.) 265 mm × 337 mm × 370 mm (W/H/D) Mass (approx.) CA-MXDK5/CA-MXDK3 8.4 kg CA-MXDK1/CA-MXDK15 7.9 kg (No.MB515)1-3 *1: Measured at 1 kHz, with tape recording signal 400 mV) *2: CA-MXDK5 only Design and specifications are subject to change without notice. Speaker section (except for MX-DK5) Main speakers (SP-MXDK3F/ SP-MXDK1F/ SP-MXDK15F) Type 3-Way 3-Speaker Bass Reflex Type (Magnetically-Shielded Type) Speakers Woofer 16 cm cone × 1 Midrange 5 cm cone × 1 Tweeter 2 cm dome × 1 Power handling capacity 100 W (SP-MXDK3F) 80 W (SP-MXDK1F/SP-MXDK15F) Impedance 6 Ω Frequency range 45 Hz - 20 000 Hz Sound pressure level 85 dB/W·m Dimensions (approx.) 215 mm × 337 mm × 259 mm (W/H/D) Mass (approx.) 3.7 kg each Subwoofer (SP-MXDK3W) (only for MX-DK3) Type 1-Way Bass Reflex Type (Magnetically-Shielded Type) Speaker 16 cm cone × 1 Power handling capacity 100 W Impedance 6 Ω Dimensions (approx.) 215 mm × 337 mm × 259 mm (W/H/D) Mass (approx.) 3.5 kg