JWA CHINON 68717 Manuals

1 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt ASSEMBLY INSTRUCTION CHINON ITEM CODE 68717 LAMP TABLE Allow 15 min For 1 person Additional tool required 2 PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2. Take care when lifting. Product should be assembled as near as possible to the point of use 3. Ensure that you have all required contents for complete assembly 4. Always read the assembly instructions carefully before beginning assembly. 5. Keep all hardware parts and packaging out of reach of small children. 6. Do not over tighten the screws and bolts as this may damage the threads 7. Assembly is to be carried out by a competent adult(s) ONLY 8. During assembly, children should be kept away from the product due to possible risk to injury. 9. Do not use this item if any components are missing or damaged. 10. Please keep the instructions for future reference. 3 PARTS LIST 1 Top Panel x1 2 Middle Panel x 1 4 Right frame x 1 5 Left frame x 1 3 Bars x 4 4 STEP 1: • Prepare a surface with a protective blanket or cardboard. • Place the left frame(5) flat on the surface, as shown below. • Insert the 4x bars(3) onto the left frame(5). • Cap the frame with the right frame(4), as shown below. • Secure with 2x bolt(A) per connection. Fasten with allen key(C). • Fasten only until the bolt is tight in the thread, do not fully fasten for now.