Kaba K-SMART3 Manuals

8 Keyscan Inc. A Member of the Kaba Group 901 Burns St. E., Whitby, Ontario, Canada L1N 0E6 1.888.539.7226 (toll free Canada/USA) 905.430.7226 (elsewhere) www.keyscan.ca Technical Support Hours — 9:00 AM to 6:30 PM Eastern Time K-SMART3 Installation Guide (Document # KD10085-1017) FCC Compliance Statement: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. Product can be used without license conditions or restrictions in all European Union coun- tries, including Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxem- bourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Spain, Sweden, United Kingdom, as well as other non-EU countries, including Iceland, Norway, and Switzerland. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause unde- sired operation of the device. Cet appareil est conforme à Industrie Canada exempts de licence standard RSS (s) . Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas provoquer d’interférences et (2) ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequen- cy energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be re- quired to correct the interference at his own expense. Changes or modifications not expressly approved by Keyscan could void the user’s au- thority to operate the equipment. K-SMART3 Bluetooth Proximity Reader Installation Guide This guide outlines how to install the K-SMART3 Bluetooth proximity reader. This reader has dedicated function LEDs and enhanced security features designed for Keyscan access control systems with compatible firmware. Enhanced security and LED features may not function with non-Keyscan control boards. See K-SMART3-ACU Compatibility on page 3. Keyscan Inc. A Member of the Kaba Group 901 Burns Street East, Whitby, Ontario, Canada L1N 0E6 K-SMART3 Features • Uses proven digital radio frequency identification technology • Has dedicated access and power LEDs • Designed for indoor or outdoor use • Suitable for mullion or single-gang mounting • Electronics sealed in tamper-resistant epoxy potting • Bluetooth functionality Table of Contents Features 1 LEDs & Security Features 2-3 Bluetooth Functionality 3 Dimensions & Templates 4-5 Wiring Connections 6 Optional Programming Card 7 Specifications 7 Parts List K-SMART3 Reader 1 Wall Switch Plate 1 Mullion Mount Box 1 6-32 x 1/4” Phillips Screw 1 6-32 x 1/4” Security Screw 1 6-32 x 1” Screws 2 #6 x 1” Screws 2 Enhanced Features • Has dedicated Present3 and Global Lockdown LEDs • Offers physical and cable anti-tamper capability for enhanced security (tamper switch not included) • Has innovative heartbeat to detect wiring faults and/or reader damage