KELCO F60 Mk2 Manuals

1 pdf manual(s) KELCO F60 Mk2 for free download (Document Types: Installation & programming manual)

KELCO F60 Mk2 Installation & programming manual [PDF] (47 pages)

  • Identifier: id-1323977
  • Brand: KELCO
  • Device: F60 Mk2 Controller
  • Type: PDF
  • Key Aspects: Environmental Factors and Restrictions, End-of-Life Handling and Disposal, Hardware Verification Checklists
  • UPD Date: 24.08.2026
  • Source File: 1403782.pdf
  • Pages: 47
  • Description: Technical operation manual for the KELCO F60 Mk2.
Pages Preview:
  • 2 IMPORTANT: READ THIS FIRST DO NOT EXPOSE THE F60 Mk2 TO VIBRATION. INSTALL ONLY IN PIPEWORK THAT DOES NOT VIBRATE. Vibration will damage the electronics within the F60 and will void your product warranty. This F60 pump controller has been fully tested and calibrated. It is set to mode 1 and it has its start-up and run-on timers both set to 5 seconds. All other functions are turned off. On start up the F60 will run the pump using its start-up timer.
  • 3 LCD SCREEN BACKLIGHT The LCD backlight can be turned on or off. To turn the light off press and hold down the (˅) button. Press and release the (R) button. Release the (˅) button. Repeat to turn the light on. The light remembers the state it was last left in if power is turned off. The light can be left permanently on or off as required. TEMPERATURE The F60 monitors its internal temperature when running. Pressing the (˅) button while the controll
  • 4 4) Never expose the F60 to static or dynamic pressures greater than 20 Bars, 290 psi. 5) Do not install the F60 in a section of pipe that is subject to vibration. Vibration will cause premature failure of the electronic components within the F60. 6) Never install the F60 in the suction pipe of the pump or in any location where it may be subject to partial vacuum conditions.
  • 5 LOCATION The F60 should be installed in a straight section of pipe preferably with 5 diameters of straight pipe either side of the paddle. The F60 can be installed in a suitable pipe socket, tapping saddle or pipe tee. The F60 should be installed in the discharge pipework of the pumping system, either before or after the system’s air cell. If the system does include an air cell a decision must be made as to which side of the air cell to locate the F60
  • 6 Controller Discharge Controller installed before the air cell BEFORE THE AIR CELL If the F60 is installed before the air cell in the system it will only start the pump on pressure since the initial fl ow will be supplied from the air cell. The only change in state the controller will see will be the falling pressure. Choose this arrangement if you want to keep pump starts to a minimum and you are prepared to accept the delay in starting associated with
Document Preview & Text Transcription (Main Page)
Click to expand and read text
KELCO F60 Mk2 DIGITAL PUMP CONTROLLER INSTALLATION & PROGRAMMING MANUAL KELCO Engineering Pty Ltd Sydney Australia www.kelco.com.au Version 010319

KELCO F60 Mk2: Controller Category Related Instructions

SmartPAC 2
Wintriss SmartPAC 2
17.08.2026 604 pages

SmartPAC 2 Tech Support Hotline 800-586-8324 8-5 EST www.wintriss.com ® includes optional DiPro PAC and ProCam PAC 1128600 Rev. P January 2018 ® ® Press Automation Control with WPC 2000 Clutch/Brake Control Wintriss Controls Group, LLC 100 Dis Product usage manual for the Wintriss SmartPAC 2 Control Systems. The document guides users through support details, device safety checks, safety precautions.

FX3G-5DM
Mitsubishi Electric FX3G-5DM
11.07.2026 18 pages

PROGRAMMABLE LOGIC CONTROLLER MODEL FX3G-5DM QUICK START MANUAL Mitsubishi Electric Automation, Inc. Operation instructions for the Mitsubishi Electric FX3G-5DM Controller. This manual covers installation, operation, and functional overview, security instructions, error codes.

MR95L
Fisher MR95L
11.08.2026 32 pages

MR95 Series D103587X012 Instruction Manual October 2014 www.fisherregulators.com MR95 Series Pressure Regulators Figure 1. Typical MR95 Series Pressure Regulators PRESSURE REDUCING REGULATORS TYPE MR95L TYPE MR95H P1757 P1753 Complete user documentation for the Fisher MR95L Controller. This guide explains the features and dimensions and layout, system parameters, network configuration, wiring setup.

HSAjet-CU
HS Automatic HSAjet-CU
12.08.2026 43 pages

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment • FAST SHIPPING AND DELIVERY • TENS OF THOUSANDS OF IN-STOCK ITEMS • EQUIPMENT DEMOS • HUNDREDS OF MANUFACTURERS SUPPORTED • LEASING/MONTHLY RENTALS � Step-by-step guide for the HS Automatic HSAjet-CU Controller. It provides instructions for product specifications, device features, installation support, power requirements.