Kenwood KDC-BT6544U Manuals

CD-RECEIVER KDC-BT6544U KDC-BT6544UY KDC-BT6044 KDC-BT6144 KDC-W5544U KDC-W5644U INSTRUCTION MANUAL © B64-4317-00/02 (EW/E2W/E0/E20) 2 | KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U Contents Before use 3 Basic Operation 4 Function Control 6 ⁄ • Read through this page first for the setting of each function. Display Settings 10 Text Display Selection Auxiliary Input Display Setting Music disc/Audio file Operation 11 Music Search Music Search for iPod All Random iPod Control by Hand Mode Direct Music Search Direct Disc Search Basic Operation of Disc Changer (Optional) Tuner Operation 14 Auto Memory Entry PTY (Program Type) Program Type preset Changing Language for PTY Function Preset Tuning Direct Access Tuning Operation of hands-free phoning 16 Before Use Receiving a call During a call Call waiting Other functions Making a call Dial a number Speed dialing (Preset dial) Calling a number in the Phone Book Calling a number in the call log Make a voice dialing call Registering to the Preset Dial Number List Display of phone number type (category) Other Functions 19 Activating Security Code Deactivating Security Code Manual Clock Adjustment Demonstration mode setting Audio Adjustments 20 Audio Control Adjusting the detail of Audio Control Audio Setup Speaker Setting Audio Preset Memory Audio Preset Recall Audio Adjustments (DSP) 23 Cabin selection Speaker Setting DTA (Digital Time Alignment) setting X’Over setting Equalizer Control Preset position selection Audio Preset Memory Audio Preset Recall Favorite Control 26 Preset Memory Preset Recall Preset Memory Delete Name Setting Bluetooth Setup 28 Registering Bluetooth device Registering Special Bluetooth device Registering PIN Code Downloading the Phone Book Selecting the Bluetooth device You Wish to Connect Deleting a Registered Bluetooth device Displaying the Firmware Version Adding a voice dialing command Setting a Voice Command for Category SMS (Short Message Service) Downloading the SMS Basic Operations of remote control 33 Appendix 35 Accessories/ Installation Procedure 39 Connecting Wires to Terminals 40 Installation/Removing the Unit 42 Troubleshooting Guide 43 Specifications 45 English | 3 Before use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the (page 20). How to reset your unit • If this unit or the connected unit (disc auto changer, etc.) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Reset button Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth. ¤ • Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth. Lens Fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters which can be displayed by this unit are A-Z 0-9 @ “ ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } | ~ . • The RDS feature won’t work where the service is not supported by any broadcasting station. • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable. Handling CDs • Do not touch the recording surface of the CD. • Do not stick tape etc. on the CD, or use a CD with tape stuck on it. • Do not use disc type accessories. • Clean from the center of the disc and move outward. • When removing CDs from this unit, pull them out horizontally. • If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc. CDs that cannot be used • CDs that are not round cannot be used. • CDs with coloring on the recording surface or CDs that are dirty cannot be used. • This unit can only play the CDs with . This unit may not correctly play discs which do not have the mark. • You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CD- RW recorder instruction manual.) 4 | KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U General functions Power/Source Select button: [SRC] Turns on the power. When the power is on, the source switches between Tuner (“TUNER”) , USB or iPod* (“USB” or “iPod”), CD (“CD”) , Auxiliary input (“AUX”), and Standby (“STANDBY”) each time this button is pressed. Press at least 1 second to turn off the power. ⁄ • When an optional accessory is connected, the source name for each device appears. • When connection of the iPod is recognized, the source display changes from “USB” to “iPod”. * Function of KDC-BT6544U/ BT6544UY/ W5544U/W5644U. Volume control: [AUD] knob Turn the knob to adjust the volume. Subwoofer output: [AUD] knob Switches between ON (“SUBWOOFER ON”) and OFF (“SUBWOOFER OFF”) each time pushing toward down for at least 2 seconds. • You can do this function when “SWPRE” in (page 6) is set to “SW”. Auxiliary input Connect a portable audio device with mini-plug cable (3.5 ø). ⁄ • Use the mini-plug cable which is stereo type and does not have any resistance. • The auxiliary input requires the setting made in “MENU” > “AUX” of (page 6). Faceplate release: Release Releases the faceplate lock so that it can be removed. Refer to the following diagram when reattaching the faceplate. ¤ • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. • Keep the faceplate in its faceplate case while detached. • Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. Text/Title scroll: [AUD] knob Scrolls the CD, audio file, and Radio text display when pushing toward up for at least 2 seconds. Muting volume upon reception of phone call (Function of KDC-W5544U/ W5644U) When there is a call, “CALL” is displayed and the audio system is paused. When the call ends, “CALL” disappears and the audio system comes back on. The audio system comes back on when [SRC] is pressed during a call. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to (page 40). Basic Operation [SRC] [FAVORITE] [SEARCH] [AUD] [] [] [TI] [

] Release Auxiliary input Disc slot Microphone USB Terminal