-
Data Acquisition System
1
-
Manual Part Number
2
-
BenchVue Data Acquisition (DAQ) Software Licensing
3
-
DC Voltage Measurements
5
-
© Keysight Technologies, 2018
6
-
Declarations of Conformity
8
-
Safety and Regulatory Information
9
-
BEFORE APPLYING POWER
10
-
South Korean Class A EMC Declaration
13
-
Safety and EMC Requirements
14
-
Keysight DAQ970A User's Guide
15
-
Introduction to the Instrument
16
-
Instrument at a Glance
17
-
Front Panel at a Glance
18
-
Rear Panel at a Glance
20
-
Plug-In Modules at a Glance
21
-
1 Introduction to the Instrument
22
-
Remote Interface Configuration
23
-
Step Front panel
25
-
Primary and Secondary DNS
28
-
Press [Home] > User Settings > I/O > USB Settings
31
-
LAN Configuration Procedure
33
-
5. Configure the "DNS Setup" (optional)
34
-
Do not turn off the instrument during the update.
35
-
Contacting Keysight Technologies
36
-
Prepare Instrument for Use
37
-
Module Wiring Connection and Installation
39
-
2. Connect the wiring to the screwdriver.
40
-
Uninstalling the Module
42
-
Connect Power and I/O Cables
43
-
Use the Built-in Help System
44
-
View the help information for a front panel key
45
-
Adjust the Carrying Handle
46
-
Rack Mounting the Instrument
47
-
Rack mounting instruments side-by-side
48
-
Keysight BenchVue Data Acquisition (DAQ) Software
49
-
Features and Functions
51
-
Typical transducer types
56
-
The internal DMM
59
-
The multifunction module
62
-
Front Panel Menu Reference
67
-
l Overview of the scan list for the module.
68
-
To configure the strain offset:
76
-
Off - Disables the cursors displayed.
84
-
(1) Y1 cursor tracks X1 cursor position.
85
-
View alarm queue
86
-
[Channel] Menu Overview
88
-
Measurements on Multiplexer Modules
89
-
Frequency and Period
118
-
8-bit Digital I/O Channel
121
-
1. Repeat step 1-4 as mentioned above.
132
-
Scanning with External Instruments
133
-
Selecting the trigger source
135
-
Alarm Limit Indications
146
-
Overview of the scan list for the module
152
-
[Save Recall] Menu
154
-
Chan 201 (VDC)
161
-
Control Instrument page
163
-
DAQM900A 20-Channel FET Multiplexer Module
166
-
DAQM901A 20-Channel Armature Multiplexer Module
167
-
DAQM902A 16-Channel Reed Multiplexer Module
168
-
DAQM904A 4x8 Two-Wire Matrix Switch
170
-
DAQM905A Dual 1:4 RF Multiplexer (50 Ω) Module
171
-
DAQM907A multifunction module
172
-
DAQM908A 40-channel single-ended multiplexer
174
-
System Cabling and Connections
175
-
Noise caused by magnetic fields
181
-
RL = Lead resistance
182
-
Post (+) Lead
190
-
Sources of Error in DC Voltage Measurements
195
-
Noise Caused by Injected Current
196
-
Vs = Ideal DUT voltage
197
-
Example: Calculating Measurement Error
201
-
Sources of Error in Resistance Measurements
206
-
Frequency and Period Measurements
209
-
DAQM902A 16-Channel Reed Multiplexer
212
-
Signal Routing and Multiplexing
214
-
Channels 1 through 10
216
-
RF Signal Multiplexing
220
-
Sources of Error in RF Switching
222
-
Using an External Pull-Up
225
-
Relay Life and Preventive Maintenance
229
-
This information is subject to change
232
