Kikusui PCR-LE Manuals

1 2 3 4 7 5 8 6 9 10 12 15 21 22 23 24 25 16 17 11 13 14 18 19 19 20 PCR-LE PCR-LE2 Quick Reference Z1-006-102, IB027724 Sep. 2017 The newest version of the operation manual can be downloaded from Kikusui website. http://www.kikusui.co.jp/en Name Function 1 OUTPUT key Turn output on and off 2 Display Display the settings/ measured value 3 Numeric keypad Enter numeric values directly 4 ON PHASE key Set the output on phase 5 RANGE key Switch output voltage range 6 SYNC key Set the synchronization function 7 OFF PHASE key Set the output off phase 8 KEYLOCK key Lock and unlock the keys 9 RESET key Reset the product 10 SLEEP key Set the sleep mode 11 LOCAL key Switch between remote and local mode 12 +/- key Switch the polarity of the voltage 13 DIGIT key The cursor moves to the left 14 CLR key Clear the numeric keypad input ALM CLR key Clear alarms 15 F key Set the frequency PHASE key Switch different displays during multiphase operation (optional) Name Function 16 I key Configure the current settings I/P/λ-MEAS key Switch the current/power measurement mode 17 V key Configure the voltage settings V-MEAS key Switch the voltage measurement mode 18 ESC key Cancel operations 19 Detachment button Detach the control panel 20 Function key Correspond to the menus on display 21 MEMORY key Save/Load settings from memory OHTERS key Configure advanced operation settings 22 SHIFT key Enable the functions that are indicated in the bottom row to the left of each key 23 ENT key Apply settings 24 SIM key Configure power line abnormality simulations SEQ key Configure sequence operations 25 OPR MODE key Configure the operation environment settings CONFIG key Specify the configuration settings Main specifications 1P: Single-phase input/output, 1P3W: Single-phase three-wire output, 3P: Three-phase output, 3P3W: Three-phase three-wire input, 3P4W: Three-phase four-wire input TYP: Typical values that are representative of situations where the PCR-LE/PCR-LE2 Series operates in an environment with an ambient temperature of 23 °C. Item PCR 500LE PCR 1000LE PCR 2000LE PCR 3000LE PCR 4000LE PCR 6000LE PCR 9000LE PCR 6000LE2 PCR 9000LE2 PCR 12000LE2 PCR 18000LE2 PCR 27000LE2 Input ratings (AC rms) Voltage 1P 100 V input type: 85 Vac to 132 Vac, 200 V input type: 170 Vac to 250 Vac 170 Vac to 250 Vac -- 170 Vac to 250 Vac -- 3P3W -- 170 Vac to 250 Vac 3P4W -- 187 Vac to 250 Vac (Phase voltage) Frequency 47 Hz to 63 Hz Apparent power Approx. 0.93 kVA Approx. 1.8 kVA Approx. 3.6 kVA Approx. 5.5 kVA Approx. 7.3 kVA Approx. 10.6 kVA Approx. 15.7 kVA Approx. 10.6 kVA Approx. 15.7 kVA Approx. 23 kVA Approx. 33 kVA Approx. 48 kVA AC mode output ratings (AC rms) Voltage Output L range: 1 V to 150 V, Output H range: 2 V to 300 V Resolution 0.1 V Maximum current(Output L range, H range) *1 1P 5 A, 2.5 A 10 A, 5 A 20 A, 10 A 30 A, 15 A 40 A, 20 A 60 A, 30 A 90 A, 45 A 60 A, 30 A 90 A, 45 A 120 A, 60 A 180 A, 90 A 270 A, 135 A 1P3W, 3P --- 20 A, 10 A 30 A, 15 A 40 A, 20 A 60 A, 30 A 90 A, 45 A Power capacity 1P 500 VA 1 kVA 2 kVA 3 kVA 4 kVA 6 kVA 9 kVA 6 kVA 9 kVA 12 kVA 18 kVA 27 kVA 1P3W --- 4 kVA 6 kVA 8 kVA 12 kVA 18 kVA 3P 6 kVA 9 kVA 12 kVA 18 kVA 27 kVA Maximum peak current Max. current (rms) × 4 (TYP)*2 Maximum reverse current *3 30 % of the max. current (rms) Frequency*1 1 Hz to 999.9 Hz*4 Resolution 0.01 Hz (1.00 Hz to 100.0 Hz), 0.1 Hz (100.0 Hz to 999.9 Hz) DC mode output ratings Voltage (output L range, H range) 1.4 V to 212 V, 2.8 V to 424 V Resolution 0.1 V Maximum current(Output L range, H range)*5 1P 3.5 A, 1.75 A 7 A, 3.5 A 14 A, 7 A 21 A, 10.5 A 28 A, 14 A 42 A, 21 A 63 A, 31.5 A 42 A, 21 A 63 A, 31.5 A 84 A, 42 A 126 A, 63 A 189 A, 94.5 A 1P3W --- 14 A, 7 A 21 A, 10.5 A 28 A, 14 A 42 A, 21 A 63 A, 31.5 A Maximum instantaneous current Max. current (rms) × 3.6 (Limited by the rated output current’s rms value) Power capacity 1P 350 W 700 W 1.4 kW 2.1 kW 2.8 kW 4.2 kW 6.3 kW 4.2 kW 6.3 kW 8.4 kW 12.6 kW 18.9 kW 1P3W --- 2.8 kW 4.2 kW 5.6 kW 8.4 kW 12.6 kW Output voltage waveform distortion ratio, Output voltage response speed Output voltage waveform distortion ratio*6 FAST 0.2 % or less -- MEDIUM 0.3 % or less 0.5 % or less Output voltage response speed *7 FAST 20 μs (TYP) -- MEDIUM 30 μs (TYP) 50 μs (TYP) General Input terminal Inlet M4 M5 M8 M8 M8*8 M5 M8*8 M5 M8 M8 M8 Output terminal M4 M4 M4 M5 M5 M8 M8 M8*9 M8*9 M8 M8 M8 *1. When the output voltage is between 1 V and 100 V or 2 V and 200 V and the load power factor is between 0.8 and 1. When the output voltage is between 100 V and 150 V or 200 V and 300 V, the output current is reduced by the output voltage. When the load power factor is between 0 and 0.8, the output current is reduced by the load power factor. When the output frequency is between 1 Hz and 40 Hz, the output current is reduced by the output frequency. *2. For capacitor-input rectifier loads, (at near the peak of the voltage waveform, excluding three-phase three-wire output). The peak current that can be output decreases in accordance with the reduction in the absolute value of the instantaneous output voltage. *3. When the output voltage is 100 V or 200 V and the output frequency is between 40 Hz and 999.9 Hz (reverse current is -180 deg out of phase with the output voltage). *4. 1 Hz to 500 Hz when a 3P05-PCR-LE (500HZ LMT) is installed in the PCR-LE and on the PCR-LE2 500HZ LMT model (during three-phase output). *5. When the output voltage is between 100 V and 212 V or 200 V and 424 V, the output current is reduced by the output voltage. *6. When the output voltage is between 80 V and 150 V or 160 V and 300 V and the load power factor is 1. *7. When the output voltage is 100 V or 200 V, the load power factor is 1, and the output current changes from 0 A to the rated value and from the rated value to 0 A. *8. Three-phase three-wire or Three-phase four-wire input: M5 *9. Single-phase three-wire or Three-phase input: M5 The accompanying CD-ROM describes the following information. Two-phase output setting PCR- LE optional Voltage compensation function Harmonic current analysis function Generating special waveforms (waveform bank) Setting the output impedance Setting soft starts (the voltage rise time) Fixing the internal Vcc Selecting the response Controlling the Output Using External Analog Signals (Optional) Remote control Sequence tutorial Options Troubleshooting Maintenance Factory default settings Alarms/ Trouble Specifications Table for power line abnormality simulation settings Table for sequence settings MANUAL Alarms/Trouble When a protection function is activated, an alarm (ALM-xx) or a trouble indication (TRBL-xx) is generated, and the output is turned off. Alarm: Press ALM CLR(SHIFT+CLR) to clear the alarm, and then fix the problem that caused the alarm. Trouble: To clear the trouble indication, turn the POWER switch off, wait at least 5 seconds, and turn it back on. If the same trouble persists, contact your Kikusui agent or distributor to request repairs. PCR-LE manual PCR-LE2 manual