Kikusui PIA4800 Series Manuals

KIKUSUI ELECTRONICS CORP. 　　1 C o n n e c t ion to the PWR Series • Version 2.20 or later is required for the PIA4800 series Power Supply Controller. If you are using an earlier version, you need to update the firmware. For details, contact your Kikusui agent. You can check the PIA4800 series version using *IDN?. For detail, see “Device Messages” 1. Control Parameters The following parameters can be controlled. • Output voltage setting • Output current setting • Output voltage readback • Output current readback • Output power readback • Overvoltage protection setting • Overcurrent protection setting • Output ON/OFF • POWER switch OFF • C.V mode monitoring • C.C mode monitoring • Power limit operation monitoring • Output ON/OFF monitoring • Overvoltage protection start-up monitoring • Overcurrent protection start-up monitoring • Overpower protection start-up monitoring • Overheat monitoring