Kikusui PMX35-3A Manuals

PMX35-3A 0-35V 3A REGULATED DC POWER SUPPLY C B A SHIFT ALM CLR FINE FINE CURRENT VOLTAGE OVP�OCP SET LOCK CONFIG LOCAL OUTPUT CV CC A V REMOTE LAN LOCK ALARM PRESET B C A You can download the most recent manuals from the following website. http://www.kikusui.co.jp/en PART NO. IB024614 Feb. 2016 PMX Series Quick Reference CURRENT/ FINE Set the current value, change a parameter in the CONFIG settings VOLTAGE/ FINE Set the voltage value, select the value of a CONFIG parameter OUT PUT Output on and off CONFIG/ B C o n f i g u r e t h e conditions, recall and save the preset memory B Status indicators Voltmeter Displays the voltage, value of a CONFIG parameter, cause of an alarm Ammeter Displays the current, p o w e r , C O N F I G parameter SET/ ALM CLR Set and confirm, release protection functions that have been activated LOCAL/ SHIFT Switch remote mode, enable the functions that are written in blue characters OCP∙OVP/ A Set and display the protection functions, recall and save the preset memory A LOCK/ C key lock, recall and save the preset memory C Panel Operations Using the PWX as a CV or CC Power Supply When the PWX is in CV mode, the set current is the limit of the current that can flow through the load. When the PWX is in CC mode, the set voltage is the limit of the voltage that can applied to the load. If the limit is reached, the PWX automatically switches the CV/ CC mode. 1 Press SET to change to the setting display. 2 Turn the VOLTAGE knob to set the voltage, Turn the CURRENT knob to set the current. Voltage range: 0 % to 105 % of the rated output voltage Current range: 0 % to 105 % of the rated output current 3 Press OUTPUT to turn output on. The output turns on and off each time you press OUTPUT. Locking Panel Operations (Key lock) When the keys are locked, the key and rotary knob is invalid. There are three levels of key lock. Use CONFIG parameter CF03 to set the level. ● Loc1: Lock all keys except the OUTPUT and memory A, B, and C keys. ● Loc2: Lock all keys except the OUTPUT key ● Loc3: Lock all keys and the rotary knob. Hold down LOCK key until the LOCK LED lights. To unlock the keys, hold down LOCK key again until the LOCK LED turns off. To set the PWX to the Factory Default Hold down LOCK+LOCAL while you turn the POWER switch on. Protection Functions The PMX is equipped with the following protection functions. When a protection function is activated, an alarm occurs, the output is turned off, and the cause of the alarm is indicated. Press OCP • OVP key for setting the OVP trip point, the OCP trip point. There are two methods to clear alarm. ● Press ALM CLR (SHIFT+SET) ● Turn the PMX off, fix the problem that caused the alarm, and then turn the PMX on. Unless you fix the problem that caused the alarm to occur, the alarm will occur again. Overvoltage protection (OVP) Activated when the output terminal voltage exceeds the set voltage (OVP trip point). setting range 10 % to 110 % of the rated output voltage Overcurrent protection (OCP) Activated when the output current exceeds the set current (OCP trip point). setting range 10 % to 110 % of the rated output current Overheat protection (OHP) Activated when the internal temperature rises to an abnormal level. Status indicators LEDs light when the PMX is in the following states. CV Lights during constant voltage mode CC Lights during constant current mode ALARM Lights when a protection function has been activated LOCK Lights when the keys are locked REMOTE Lights during remote control LAN Lights and blinks when the LAN interface is in use ( No Fault / Fault / Stand- by / WEB Identify ) PRESET A, B, C Lights when the memory A, B or C values are being recalled or saved Preset Memory Function You can stores three sets (A, B or C) of the voltage and the current. Saving setting to preset memory To save a preset memory, press SHIFT+the memory key (A, B, or C) to which you want to save the settings until their LEDs turn on (Hold the keys down). Recalling preset memory entries 1 Press SHIFT+the memory key (A, B, or C) from which you want to recall the preset memory entry. ※ If you hold down, the present values in use will be saved to the preset memory entry instead. 2 Check the displayed settings, and then press SET. Measured Value Display and Setting Display • Measured value display When the SET key LED is off, the present output voltage and output current are displayed. You can change the output voltage and output cur- rent while the measured value displayed. • Setting display Press SET to light its key and display the present output voltage and output current settings. Press SET again to return to the measured value display. OUT PUT LED Lights when output is turned on

Regulated DC Power Supply PMX-A Series PMX18-2A PMX18-5A PMX35-1A PMX35-3A PMX70-1A PMX110-0.6A PMX250-0.25A PMX350-0.2A PMX500-0.1A Multiple-output DC Power Supply PMX-Multi Series PMX32-3DU PMX32-3TR PMX32-2QU Communication Interface Manual PART NO. IA005364 Oct 2019