kingsley-bate Chelsea CO14 Manuals

Kingsley-Bate CO14 Chelsea Dining Side Chair Assembly Instructions KINGSLEY–BATE Fine Garden Furniture 0ASSEMBLY INSTRUCTIONS FOR THE CO-14 RIGHT END FRAME BACK SEAT LEFT END FRAME * NOTE: 4A TENON 5B MORTISE HOLE 1STEP-I Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood. NOTE: During assembly of the furniture please match all joints with the corresponding letters or numbers stamped on the furniture. 2STEP-II Fit the BACK and SEAT ten ons into the END FRAME mortise holes using the stamped num bers or letters as guides. If necessary, gently rock the BACK and SEAT while pushing the tenons into the m ortise holes until all joints fit snugly together. 3STEP-III Fit the remaining END FRAME m ortise holes over and onto all exposed tenons and using a rubber mallet gently tap the END FRAME evenly un til all joints fit snugly together. Carefully hammer dowels into the pre-drilled holes of the assembly, details are shown in the photographs. All dowels and dowel holes are prope rly marked with stickers. NOTE: DO NOT FORCE THE DOWELS; ANY EXCESS CAN EASILY BE SANDED AWAY. IF THE DOWELS ARE NOT FLUSH DO NOT CONTINUE TO DRIVE THE DOWELS, YOU MIGHT DAMAGE THE ITEM. IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR CHOOSING OUR FURNITURE. *KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY. 7200 Gateway Court, Manassas, Virginia 20109 Phone: 703-361-7000, Fax: 703-361-7001