KornKraft Fabula Manuals

Instruction manual – Fabula You are the owner of the model Fabula a high-quality manual grain mill. It was manufactured for you by artisanal craftsmanship. Before you start the milling, please note the following points: The milling Keep the mill between the thighs – close to the knees – in a sitting position. The grinded sides make it easier to hold. Turn the handle to the right (clockwise) Running in First you should run the mill in. Do this by milling approx. 30 gramms (One tablespoon) of dry grains (wheat, millet or barley are particularly suitable for this) at a medium setting. Turn the handle clockwise. The first time you use the mill, abrasion of the millstone occurs which is perfectly harmless to health but can contain stone particles. That’s why it is not suitable for consumption. Setting the fineness Select the desired coarseness by removing the collection cup by turning to the left. For a fine grinding turn the adjustment knob to the right and for a coarse grinding turn it to the left. Insert the collection cup again and fix it by turning to the right. (Please do not fasten too tightly!) Fill in the grains and try the fineness of grinding, If necessary readjust. Suitable grains You can use the mill to grind all types of grain, except corn. To grind oil seeds, mix them with dry grains. If you grind oat types with a high oil content at fine settings, the grinding mechanism may clog. (See cleaning and care). Please use only dry and cleaned grains. Desk mount available as optional accessory Michael Gergen Hüttenstraße 6 D-66839 Schmelz Tel. +49 (0) 68 87-1557 Fax. +49 (0) 68 87 - 77 77 24 www.kornkraft.de [email protected] G ETREIDEMÜHLEN