Kramer KDS-SW2-EN7 Manuals

KDS-SW2-EN7 Quick Start P/N: 2 9 0 0 - 3 0 1 5 4 7 QS Rev: 1 Scan for full manual KDS-SW2-EN7 Quick Start Guide This guide helps you install and use your KDS-SW2-EN7 for the first time. Go to www.kramerav.com/downloads/KDS-SW2-EN7 to download the latest user manual and check if firmware upgrades are available. Step 1: Check what’s in the box KDS-SW2-EN7 2x1 4K AVoIP Switcher Encoder 2 Bracket sets 1 Quick start guide Step 2: Get to know your KDS-SW2-EN7 # Feature Function 1 HDMI IN Connector Connect to an HDMI acceptor. 2 USB-C IN Port Connect to a USB-C source. • When powered by a Kramer 24V power supply (optional), charges sources (that support USB Power Delivery 2.0) up to 60W. 3 LCD Display Use for device configuration such as input selection, unique channel/AV stream setting and EDID. 4 Menu Navigation Button  Press to return to the previous menu.  Press to move up to the next configuration parameter.  Press to go to the next menu.  Press to move down to the next configuration parameter. Enter Press to accept changes. 5 LINK LED See LED Functionality. 6 NET LED See LED Functionality. 7 ON LED See LED Functionality. # Feature Function 8 24V/5A DC Connector Connect to the power adapter (purchased separately). 9 RESET Recessed Button Press and hold for 10 seconds to reset the device to its factory default values. All LEDs flash. 10 LAN MEDIA 1G(PoE) RJ-45 Port Unicast: connect for streaming either directly to a decoder or via LAN. Multicast: connect to multiple decoders or connect to one decoder to which multiple decoders are daisy-chained via SERVICE (1G) port.