Kwikset SMARTCODE 916 Manuals

Required tools Ruler Hammer Wood block Phillips head screwdriver Additional Tools (depending on application) A B M Parts in the box Latch “B” is not included. If needed, please contact Kwikset to order a drive-in latch for your lock. * Installation is the same regardless of model shown Exterior Touchscreen* Strike Adapter Ring C D E Keys Mounting Plate SmartKey Tool Batteries G H 03809 Traditional Traditional Contemporary Contemporary 46780 N Q S P Fasteners 48654 64109 T V 49191 U A N or P (x2) N P S Q A A B B B A B A B C D Is the door edge chiseled? Is the D-shaped hole centered in the door hole? Which latch are you installing? Hold the latch in front of the door hole, with the latch face flush against the door edge. YES YES NO NO Use latch “A”. If the latch bolt is not already extended, extend the latch bolt as shown. No adjustment is required. Proceed to next step. D-shaped hole D-shaped hole Rotate latch face as shown to extend latch. wood block actual size Use latch “B” (not included). If the latch bolt is not already extended, extend the latch bolt as shown. Latch “A” Latch “B” S (x2) C Q (x2) Longer screws install closest to the door jamb. door frame E Install strike on the door frame. Make sure the hole in the door frame is drilled a minimum of 1" (25 mm) deep. or chiseled not chiseled or Prepare the door and check dimensions Install the latch and strike or Kwikset Technical Support 1-866-863-6584 www.kwikset.com W Begin with your smart home app If you will be using a smart home app with your lock, download the app and set up your controller or hub before proceeding further with lock installation. 1 If drilling a new door, use the supplied template and the complete door drilling instructions available at kwikset.com/doorprep 1-3/8" –2" 35 – 51 mm 1" 25 mm 2-3/8" or 2-3/4" 60 or 70 mm backset Measure to confirm that the backset is either 2-3/8" or 2-3/4" (60 or 70 mm). Measure to confirm that the hole in the door edge is 1" (25 mm). Measure to confirm the door is between 1-3/8" and 2" (35 mm and 51 mm) thick. Remove your existing deadbolt from your door. C D E F B Measure to confirm that the hole in the door is either 2-1/8" (54 mm) or 1-1/2" (38 mm). or 2-1/8" 54 mm 1-1/2" 38 mm Note: Additional door preparation may be required for doors with 1-1/2" (38 mm) holes. Consult the deadbolt drilling instructions at kwikset.com/doorprep A Make sure your door is compatible. If you have a standard deadbolt mounted separately from the handle below it, your door is compatible. Mortise Lock Not Compatible Compatible Not Compatible Integrated Interior 2 3 Interior Assembly* M K L or or 1 / 4 ENGLISH Installation and User Guide 69786-001 Rev 01 ZigBee F F Not Compatible Rim Lock