KYLAND Technology SICOM3009A Series Manuals

KIEN7009/SICOM3009A/SICOM3306 Industrial Ethernet SwitchHardware Installation Manual Publication Date: Mar. 2015 Version: V1.1 KIEN7009/SICOM3009A/SICOM3306 Industrial Ethernet Switch Hardware Installation Manual Disclaimer: Kyland Technology Co., Ltd. tries to keep the content of this manual as accurate and as updated as possible. This document is not guaranteed to be error-free, and we reserve the right to amend it without notice to users. All rights reserved. No part of this documentation may be excerpted, reproduced, translated, annotated or duplicated, in any form or by any means without the prior written permission of KYLAND Corporation. Copyright © 2015 Kyland Technology Co., Ltd. Notice for Safety Operation The product performs reliably as long as it is used according to the guidance. Artificial damage or destruction of the device should be avoided. Before using the device, read this notice carefully for personal and equipment safety. Please keep the manual for further reference. Kyland is not liable to any personal or equipment damage caused by violation of this notice.  Do not place the device near water sources or damp areas. Keep the ambient relative humidity within the range from 5% to 95% (non-condensing).  Do not place the device in an environment with high magnetic field, strong shock, or high temperature. Keep the working and storage temperatures within the allowed range.  Install and place the device securely and firmly.  Please keep the device clean; if necessary, wipe it with soft cotton cloth.  Do not place any irrelevant materials on the device or cables. Ensure adequate heat dissipation and tidy cable layout without knots.  Wear antistatic gloves or take other protective measures when operating the device.  Avoid any exposed metal wires because they may be oxidized or electrified.  Install the device in accordance with related national and local regulations.  Before power-on, make sure the power supply is within the allowed range of the device. Overhigh voltage may damage the device.  Power connectors and other connectors should be firmly interconnected.  Do not plug in or out the power supply with wet hands. When the device is powered on, do not touch the device or any parts with wet hands.  Before operating a device connected to a power cable, remove all jewelry (such as rings, bracelets, watches, and necklaces) or any other metal objects, because they may cause electric shock or burns.  Do not operate the device or connect or disconnect cables during an electrical storm.  Use compatible connectors and cables. If you are not sure, contact our sales or technical support personnel for confirmation.  Do not disassemble the device by yourself. When an anomaly occurs, contact our sales or technical support personnel.  If any part is lost, contact our sales or technical support personnel to purchase the substitute. Do not purchase parts from other channels.  Dispose of the device in accordance with relevant national provisions, preventing environmental pollution. In the following cases, please immediately shut down your power supply and contact your Kyland representative:  Water gets into the equipment.  Equipment damage or shell damage.  Equipment operation or performance has abnormally changed.  The equipment emits odor, smoke or abnormal noise.

SICOM3009A/3306/3216/KIEN7009 Series Industrial Ethernet Switches Web Operation Manual Kyland Technology Co., LTD. Publication Date: May 2012 Version: V1.1 Customer Service Hotline: (+8610) 88796676 FAX: (+8610) 88796678 Website: http://www.kyland.cn E-mail: [email protected] Disclaimer: Kyland Technology Co., Ltd. tries to keep the content in this manual as accurate and as up-to-date as possible. This document is not guaranteed to be error-free, and we reserve the right to amend it without notice. Copyright © 2012 KYLAND Technology CO., LTD. All rights reserved No part of this documentation may be excerpted, reproduced, translated, annotated or duplicated, in any form or by any means without the prior written permission of KYLAND Corporation. I Contents Preface ............................................................................................................ 1 1. Product Introduction .................................................................................... 6 1.1 Overview ........................................................................................... 6 1.2 Product Models ................................................................................. 6 1.3 Software Features ............................................................................. 7 2. Switch Access ............................................................................................. 8 2.1 View Types ........................................................................................ 8 2.2 Console Port Access ......................................................................... 9 2.3 Telnet Access .................................................................................. 12 2.4 Web Access .................................................................................... 13 3. Device Management .................................................................................. 16 4. Device Status ............................................................................................ 17 4.1 Basic Information ............................................................................ 17 4.2 Port Status ...................................................................................... 17 4.3 Port Statistics .................................................................................. 19 5. Basic Configuration ................................................................................... 20 5.1 IP Address ....................................................................................... 20 5.2 Device Information Configuration .................................................... 21 5.3 Port Configuration ........................................................................... 22 5.4 Change Password ........................................................................... 25 5.5 Software Update ............................................................................. 25 5.5.1 Software Update by FTP ........................................................ 25 5.5.2 Software Update by TFTP ...................................................... 29 5.6 Configuration Upload & Download .................................................. 33 6. LLDP .......................................................................................................... 35 6.1 Introduction ..................................................................................... 35 6.2 Web Configuration .......................................................................... 35