KYLAND Technology SICOM3448G-Port-HV-HV Manuals

SICOM3448G Series Industrial Ethernet Switch Hardware Installation Manual Publication Date: Jan. 2017 Version: V1.0 No.: SICOM3448G Industrial Ethernet Switch Hardware Installation Manual Disclaimer: Kyland Technology Co., Ltd. tries to keep the content of this manual as accurate and as updated as possible. This document is not guaranteed to be error-free, and we reserve the right to amend it without notice to users. All rights reserved. No part of this documentation may be excerpted, reproduced, translated, annotated or duplicated, in any form or by any means without the prior written permission of KYLAND Corporation. Copyright © 2017 Kyland Technology Co., Ltd. Notice for Safety Operation The product performs reliably as long as it is used according to the guidance. Artificial damage or destruction of the device should be avoided. Before using the device, read this manual carefully for personal and equipment safety. Please keep the manual for further reference. Kyland is not liable to any personal or equipment damage caused by violation of this notice.  Do not place the device near water sources or damp areas. Keep the ambient relative humidity within the range from 5% to 95% (non-condensing).  Do not place the device in an environment with high magnetic field, strong shock, or high temperature. Keep the working and storage temperatures within the allowed range.  Install and place the device securely and firmly.  Please keep the device clean; if necessary, wipe it with a soft cotton cloth.  Do not place any irrelevant materials on the device or cables. Ensure adequate heat dissipation and tidy cable layout without knots.  Wear antistatic gloves or take other protective measures when operating the device.  Avoid any exposed metal wires because they may be oxidized or electrified.  Install the device in accordance with related national and local regulations.  Before power-on, make sure the power supply is within the allowed range of the device. High voltage may damage the device.  Power connectors and other connectors should be firmly interconnected.  Do not plug in or out the power supply with wet hands. When the device is powered on, do not touch the device or any parts with wet hands.  Before operating a device connected to a power cable, remove all jewelry (such as rings, bracelets, watches, and necklaces) or any other metal objects, because they may cause electric shock or burns.  Do not operate the device or connect or disconnect cables during an electrical storm.  Use compatible connectors and cables. If you are not sure, contact our sales or technical support personnel for confirmation.